"I wish there is an easy answer to this question, so many factors are at play when determining this.
This may be good place to start http://en.wikipedia.org/wiki/File:Patch_antenna_pattern.gif
usually more gain means "sharper"…"
Dusan's Page
Latest Activity
Dusan commented on Trent at MyGeekShow's blog post Losing the Shrike Again - Still Learning!"Ok here is my 5 cents
1.Fix FPV clover on the airplane as all this comments say it need to point up in order to have best performance.
2.Have high gain patch or Yagi on the ground (you will need to track the model with it but it should give you nice…"
Dusan commented on Nicolas Brieger's blog post Digital FPV with X8"if I'm not mistaken this is Ubiquiti aircam dome…"
Dusan commented on Max Levine's blog post Now we know why NASA projects are so expensive :)"Over complicated for rover mission BUT ! one step forward toward human lending on Mars.
we all see just rover landing but this is actually learning mission for tomorrow human flight to the Mars. "
Dusan replied to bret's discussion X-Plane 9 Flight Simulator"If this is still available I would like to get it. Send me your Paypal email to send you money.
Thanks"
Dusan commented on Andreas M. Antonopoulos's group Telemetry over cellular IP"No not yet, I just red about it at hackaday.com and I thought sharing "
Dusan commented on Andreas M. Antonopoulos's group Telemetry over cellular IP"They nailed it ! right on !!"
Dusan commented on Andreas M. Antonopoulos's group Telemetry over cellular IP"ASUS WL-330N3G only few ounces running of 5V running OpenWRT have this GPRS modem and hacked serial to connect to APM. On "short" range it can be connected by using wireless connection and on long range…"
Dusan commented on Trent at MyGeekShow's blog post Successful Auto Takeoff!"Once the plane is moving faster than a few m/s (I think 3m/s) it will lock onto a heading engage throttle and hold that heading-throttle until the desired altitude is reached."
Dusan commented on Chris Anderson's blog post "We choose to go to the moon in this decade and do the other things, not because they are easy but because they are hard.""My two cents
My roommate bought new camera day be4 and I was flying my easy start for the first time with APM
"
Dusan commented on Scott Plunkett's blog post New ArduStation HUB Proposal / Request for Assistance; Call for discussion and crowdsourcing"If we want to put more than one antenna on tracking system and if we want more torque and precision to handle it I recommend using stepper motors, with encoders and with belt drive system. and while at it, we can…"
Dusan commented on Wes Collins's blog post Airship Colossus Drone Carrier Design is Complete!!"Doesn't helium lose buoyancy with low temperatures exceptionally, and if, how do you plan to compensate"
Dusan replied to Christoph's discussion Servo Jitter in Fly Mode in the group ArduCopter (traditional heli) user group"Do you have telemetry module connected? Is it to close to APM?
I hade have similar problem, and by pushing telemetry module future apart from APM and changing its antenna polarization problem disappeared. It seems that RF from xbee is affecting…"
Todd Hill left a comment for Dusan"Hello Dusan. We are waiting for our new molding materials at the moment. Although it will not be production quality (per se) I can mold you a body from our test molds. You will have to cut out for your frame and add mounting hardware…"
Dusan replied to Mike Murphy's discussion Throttle out won't work on APM"I'm having exactly same problem, is it possible to replace just mixer on APM ?"
Profile Information
- About Me:
- mayB L8er
- Tell us a bit about your UAV interest
- Areal photography
- Hometown:
- New York
Comment Wall (1 comment)
- At 8:39am on August 20, 2011, Todd Hill said…
Hello Dusan. We are waiting for our new molding materials at the moment. Although it will not be production quality (per se) I can mold you a body from our test molds. You will have to cut out for your frame and add mounting hardware your self. The bodies are molded and fitted with appropriate hardware for our frames, but it should be no trouble for you to fit it to yours, if you have access to rotary tools. Do you prefer carbon, fiberglass, or a combination of both? Both a top and bottom half? Price will depend on exactly what you want. Just for an Idea of how much, full carbon body will be close to $50 + shipping. Fiberglass around $30.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
203 members
-
Moderators
24 members
-
ArduPlane User Group
720 members
-
ArduCopter User Group
1355 members
-
ArduRover User Group
207 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
