CADBeyond
  • Hong Kong
Share

CADBeyond's Friends

  • shanthosh ravikumar
  • juan camilo montero
  • Hex Air Robot

CADBeyond's Groups

CADBeyond's Discussions

Anyone have this experience in AC-3.1

Started this discussion. Last reply by Graham Harding Dec 19, 2013. 1 Reply

I just upgrade my quadcopter to AC-3.1 yesterday. All tunes were done. It's quite stable flight, but sometime in stable mode the elevation of the copter was decrease 1-2 meter suddenly and return to…Continue

Tags: AC-3.1

Longer flight setup

Started this discussion. Last reply by CADBeyond Oct 29, 2013. 5 Replies

I'm wondering how the arducopter can flight for over 30 mins! My one can flight for 10 mins only and would like to design a arducopter which can flight more than 15mins. As below is my arducopter…Continue

Looking for a material which can improve the CompassMot

Started this discussion. Last reply by Darren Royle Sep 13, 2013. 16 Replies

I would like to ask, anyone tried to use some material for covering the ESC's electric cable to control the compassmot results? What material are you using? Thanks :)Continue

Flighting in between the high rise buildings

Started this discussion. Last reply by Raph Sep 10, 2013. 4 Replies

Today I tried to fly my copter in the area where is nearest the two high buildings. I found that the copter is flight not very stable (in loiter) compare with the open space. Would like to ask how to…Continue

 

CADBeyond's Page

Latest Activity

Graham Harding replied to CADBeyond's discussion Anyone have this experience in AC-3.1
Dec 19, 2013
CADBeyond posted a discussion

Anyone have this experience in AC-3.1

I just upgrade my quadcopter to AC-3.1 yesterday. All tunes were done. It's quite stable flight, but sometime in stable mode the elevation of the copter was decrease 1-2 meter suddenly and return to stable. During the flight, I did switch to Autotune mode by CH7.Do you guy have any idea why does it happen? Thanks.See More
Dec 18, 2013
ausdroid replied to CADBeyond's discussion Setup of CHDK
"Hi All, I have a powershot S110. While playing around with the ISO settings, It will only go up to 320. Is this 3200?? i.e. are they just leaving a zero off?"
Nov 16, 2013
CADBeyond commented on Gerard Toonstra's blog post 2D images to 3D virtualized landscapes workflow
"Very nice!"
Nov 5, 2013
CADBeyond replied to CADBeyond's discussion Longer flight setup
"8 lbs is very good enough! Are you using hexa type? and does the battery is connected in parallel, not serial? Thanks."
Oct 29, 2013
Eddie Weeks replied to CADBeyond's discussion Longer flight setup
"20 min, no problem... with 3 x 5000 4S rocket 3020 600KV Strong stable copter... could lift 8 lbs on 2 x 5000"
Oct 29, 2013
CADBeyond replied to CADBeyond's discussion Longer flight setup
"Ok! How long can you get if 12x3.8 on 4 cell and 600kv? Thanks."
Oct 29, 2013
Eddie Weeks replied to CADBeyond's discussion Longer flight setup
"I run 12 x 3.8 on 4cell and 600 kv... ..  I think your prop is a bit small.. try 12x3.8 and 2 x 5000 like Richard said.. Eddie Weeks www.jetlens.com"
Oct 29, 2013

T3
Richard Boyhan replied to CADBeyond's discussion Longer flight setup
"Double up your battery, you can get way past 15 minutes with two 5000 batteries."
Oct 29, 2013
CADBeyond posted a discussion

Longer flight setup

I'm wondering how the arducopter can flight for over 30 mins! My one can flight for 10 mins only and would like to design a arducopter which can flight more than 15mins. As below is my arducopter setup: Mode: HexaMotor distance: 550mmMotor kv: 660Battery: 3 cells 5000mahPropeller: 1147 Total weight (include battery): 2150gFlight duration: 10minsLoiter mode: 15mins Could you share your copter setup and flight duration? :) See More
Oct 28, 2013
CADBeyond replied to Forrest Frantz's discussion Build Your Own Copter - Part II
"Thanks for your explaination. I will test it later following your instruction. I have not create any excel table for doing the design. I just use the CAD and carry out the testing in field. :) I've downloaded the excel table by you. I'm…"
Oct 16, 2013
CADBeyond replied to Forrest Frantz's discussion Build Your Own Copter - Part II
"Thanks. Now I'm going to design and build a hexa-copter (Next one should be H!) using the carbon plate. My design is only allow 11" props. The proposed motor is 40XX with 6XX kv (I forgot the exact figure:~). I worry that does it good…"
Oct 14, 2013
CADBeyond replied to Forrest Frantz's discussion Build Your Own Copter - Part II
"Thanks a lot for your explanation. Eventually I got the answer! Did you try to simulate the disaster? Can the X2 or H able to recover in this situation? Actually I want to build a more reliable drones! :) "
Oct 9, 2013
CADBeyond replied to Forrest Frantz's discussion Build Your Own Copter - Part II
"Very good thread!! Thanks Forrest. I would like to ask which design to be provided a reliable flight if there is any one/ two props was fail during flight. I like the design of  X2 and H!    "
Oct 8, 2013
Darren Royle replied to CADBeyond's discussion Looking for a material which can improve the CompassMot
"in my new fpv frame ,the compassmot was 160%  , I add an external compass placing it on 30mm stand off  and did nothing less .Re-tested and got 28% . And that's with the 5.8 200ma video tx and board camera along with all the…"
Sep 13, 2013

Developer
Bill Bonney replied to CADBeyond's discussion Looking for a material which can improve the CompassMot
"Aluminium foil does not shield magnetic fields. You may have seen a reduction, but for other reasons. A sheet of aluminium placed in a moving magnetic field will generate an electrical current flowing in it. A flowing current will creatw a magnetica…"
Sep 13, 2013

Profile Information

About Me:
SpatialGuru\ Beginner of UAV\ IT guru
Please tell us a bit about your UAV interest
Create an amazing video, orthomap, dtm, dem, termain model, model of heritage building is my interest to learning UAV :)

CADBeyond's Videos

  • Add Videos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service