"if it helps for somebody, in my case i found lowering Rate Loter I and Imax it hovers smoother, the agressive tilt to keep the possition in loiter has gone. if lower too much, it cant hold the possition, is like drifting against the air, and…"
"what wold be your advice for low kv motors? in my case, i habe been working with diferent low kv motors, in this case e800 340 kv, when enter in loiter it hovers ok, but in windy conditions it wobble or oscillate to keep the possition, i have…"
"3DR support is much better, despite the problems you've had with them.
I've always had a good experience with them. To be honest, with my Iris I tend to try to fix things myself because it's so far from stock at this point. But with…"
"Isn't it safe to say that on a personal level Chris Anderson isn't getting out of the DIY side of things. It's just 3DR as a company. DIY and this site seem like a real passion for him. I don't know, it just seems that way to me,…"
"On the one hand Chris says 3DR has enough runway (financially) to get them through to the 2nd quarter of 2017, at which point they'll need to raise more capital (they'll actually need to start raising the round months in advance). On the…"
"You can not do what you want to do.
The smart shots on Solo require GPS to work. That is how they are set up. For example, the Orbit smart shot works by determining the GPS coordinates for the "thing" you want to orbit.…"
"No. Don't go down that road. You are new to the Solo and pixhawk/apm/arducopter. I would not recommend changing parameters, yet. And besides, it won't allow you to do what you are trying to do anyway.
(For the record,…"
"Ouch. Big bummer. Its too late now, but when you start out, its definitely best to keep your body and the drone aligned in the same direction. So forward for you is forward for it. Right is right. Left is left. I still…"