"sorry for multiple digitation errors, I am not comfortable with this kbd and sent the message as mistake"

"most liquids react as slmost solids when sudden speed object try to force it. try to shot a bullet on water to see it (don't do it, bullet will bounce out) anyway when crashing g forces are so great that apm will not break only for the…"

"Olivier I have some idea to share and some code too, I would like your opinion, can you please check your invitation so we can speak a little?"

"Frank, Did you get this solved?  I'm trying to do the same thing. Regards, Larry"

"What a nice graph, I would love to have it for all my planes, I find the optimal aoa with trials to find the best climbing efficency.. your 1.3kg of rag is when it generate 8kg? at max speed you can reach how much drag it needs to keep is own weight…"

"Same thing here but with a powered glider, I only  have 5 minutes of full throttle and wish to setup a  glide only auto mode..any help? did you find a solution? I actually permit the autopilot to use only half the power, it do level flight…"

"Hi, I use your software with my custom arduplane. I have some other data that I wish to display, I send it as mavlink in throttle, battery %, packet lost. in reality they are rc uplink and downlink rssi and video rssi. Also I have 3 voltages that I…"

"Hi Roberto, what kind of failsafe is inside it? does it have ppm like apm with same limitations?"

"Hi Doug, I would be happy to participate, I have ton of code for apm some very good some very bad :) same for wiki, I find errors all over and wish to correct them but I can't. PRobably is too late because I found majot of the errors when still…"

"Doug Anyone who try new code need a failsafe in case of hang, at least I need that. Also hw can freeze for external problems like bec going under  a certain voltage for a second. The important si being aware of limitation, thing that is not…"

"sorry if I used this thread but I have hard time getting in contact with some developer."

"oliver I have a good code on plane and need planner to help it, can you consider to help? now I have camera moving with dcm and gps to target a place, when I move the camera code returns the new lat and lon pointed.  xplane simulation and…"

"now I have camera moving with dcm and gps to target a place, I should implement opencv on the ground to send to the plane the corrections needed. to be fair xplane simulation and ground test reveals no need for such an error correction, but point at…"

"I had same problem. Find the pins of the chips that are giving the wrong signal and put your solder on it for 2 sec to  resolder them, it worked for me. you can resolder every pins on each chip too.  apm hw is not well engineered, it bends…"

"wiki is wrong this is maye the 3rd time I say that.. you should set rc5 = 4 not 1 that is passtrough. it has no hw failsafe, only sw. is apm reboots you lose tha 2nd aileron"