"Thanks I tried with a shorter cable the message is gone."

"Hi  Something new to me ,anyone to tell me what it is about ? . After loading 2.9.1 to my APM2.5 I got the following message : "upload succeeded but verify failed :exp 70 got 48 at 110136""

"Chris ,You were absolutly right !! After a 4 mn flight in the backyard by -5°C then landing and GPS test, everything looks OK , it is still a little bit checky but stable ,I probably have to adjust some parameters ??? Many thanks What is really…"

"Thanks Chris Is it something to do in MP to be in Auto Cal , I will try what your said."

"Many thanks and congratulations to the devel. team for this soft version. The altitude hold is now a dream but ..position hold shows a very strange behavior while it was almost perfect with V.2.8.1 ?? The quad will go wild in one direction and do…"

"Hi ! this is more a question than a comment. Some one uses the Spektrum satellite receiver on the APM2 ? The channels are not active in Mission Planner. "

"Hi Marc I bought the Hunter Vtail frame :http://vizionair.fr/droneshop/fr/droneshop/433-dialfonzo-hunter-vtail-500mm.html They claim that you need either a Vtail  Or Y4 mode (Multiwii FC) do you think that it could work with the APM2 …"

"http://www.buildyourowndrone.co.uk/Spektrum-Adapter-p/spek-ad.htm There's a thing here but it looks dodge because I don't really want to flash the PPM chip."

"I switch to the English Mission planner 1,1,73 !!! no more confusion. I loaded the vers.2,5,4 and made few changes ,it looks much better and my quadri is flyable now.I still have to do some tuning for Alt_Hold (the quad is climbing slowly…"

"jsut goto config > planner > language"

"Since I follow closely everything going on with this beautiful project I would prefer to get my Mission Planner updates in English. Is it a simple way to get all the update in english or how easy is it to download the English version. Thanks"

"Olivier we met several times at Denis's shop. Ok for the multi rotor meeting just wait fro a better weather. I will bring an Hexa from Multikopter.de  an  other hexa with the Naza module then the quadri with the APM2 (still under…"

"Hello Michael You are probably right concerning the mislabeling for the french translation but there is something wrong at least in the loiter box when I load the same file the "I" term that I have adjusted to 0,001 in the old mp version…"

"looks like the problem comes back to a language translation issue. the order is P I D, the field is just mislabeled"

"Yes, Jl there's something wrong in your planner, dunno why.You read this two extra i-term only when you try to load an old configuration file? :-)"

"I don't know if this helps.  But when I got the MP 1.1.74 They didn't have the two I's.  Is it possible that in 1.1.73 that the extra I was actually supposed to be the D "