Hi guys and girlsI am looking for a remote trigger for a Sony a55 it has a remote input that has 3 pins if i connect the first 2 pins the camera does an auto focus then if you connect the 3rd pin…Continue
I have been using Mission Planner for more than 3 years Its a great GC it does everything we need from set up analysis to mission planning but i notice on the latest release the abasulute function has been removed how do i get it back i…"
"FAILSAFE SETTINGS: Main Battery = Not ActivatedGround Control = Activated, with always RTL Receiver = Not Activated GEO Fence = Not Activated
You can see by the logfiles the only failsafe you have set is from your GC and not from your radio"
"Looking at your log file other than that i see you switched back and foward between RTL and stabilize your quad seems to be set up well your vibration levels are to high if you sort them out your quad will fly well "
"PARAMETER ISSUES:-ARMING_CHECK = 0Warning: Pre-Arming Check is not Active (0=Off & 1=Fully On)
ARMING_CHECK = 0FS_GPS_ENABLE = 1Warning: GPS Pre-Arm checks are disabled, while GPS Failsafe are Enabled.Warning: GPS could be unstable while the GPS…"
I have flown Helicopters for the past 35 odd years and have been fascinated with the ardu board hardware software and what can be achieved i'm also a fixed wing pilot and an Instructor on Helicopter and fixed wing.
Please tell us a bit about your UAV interest
I want to be able to fly both Quads Helicopters and planes using the ardu board and its auto piloting ability
No comments yet!
You need to be a member of DIY Drones to add comments!