Gil's Discussions
Replacing thermo sensors
Replied Dec. 28, 2009
Gil's Page
Latest Activity
Hi Bill, thanks ...i´ll check this out and post the results about the compatibility of the PicKit2 programmer.
best regards
G
Hi Bill, i´ve got one question about the programmer pinout socket of the redboard, can you tell me which pin is what in order that i could make an adapter/extender so it can be programmed from the outside of the plane fuselage using my Pickit 2 ?
I…
For now...i´ll be ok, with the UAVDevBoard, for my newest UAV platform that i´m working on, but i still want to replace the thermophiles on my trainer UAV .
OlivierD, thanks for the links.
cheers
Chris, that's the day I will brake the piggy bank with a sledge hammer and race to the DIYDrones store !!
Arduino Mega running DCM with a 9DOF IMU, Ublox GPS and Airspeed sensor, possibly with Barometric altitude added, Xbee, all neatly tucked away…
As mentioned, we're developing a "9DoF" version of ArduIMU as a Thermopile Replacement. Should be in in Q1. A non-trivial technical challenge, given that it doesn't have access to the GPS data, like the regular IMU (which is why we're adding the mag…
You can replace the FMA sensors by combining these 2 items:
One of these:
http://www.ryanmechatronics.com/index_files/ProductDetailCHIMU.htm
and one of these to convert the IMU's digital outputs into analog outputs, emulating FMA sensors:
http://ww…
Hi Rana, i know the code is free, i just want to know if you have made special changes in the code for flying with a Trainer 4 ch airplane,....that you may want to share,... just that !
thanks
Hi Rana, i´m trying to implement the ardupilot on my new trainer 40, i´ve been flying with Rcap and since you´ve fully tested the code on your trainer,....is there any chance that you could share it with me ?
I´ll be moving to the UAV red board but…
Profile Information
- About Me:
- UAV enthusiast
- Website:
- http://www.miniplanes.net
Comment Wall
- No comments yet!
© 2010 Created by Chris Anderson
