hello, i am doing on a project in labview interface in reading the quadrotor pitch, roll and yaw. i humbly request for the pin mapping for this board. If any1 who is good and know what am i doing, please give me some guides. i went through the source code and forum itself and i still can't find it. sorry if i did not show much effort in finding or missed it, but i've spent very long hours in this.. not very good in this. i am still learning.See More

Hi, i am trying to develop a wireless computer interface to control the quadrotor, rather than using the RC Tx.Firstly, Labview will be used to create the interface. I am using the VISA serial port as it detects the xbee pro from USB port, also allows us to set the baud rate,data bits and etc. (Picture attached).Secondly, the buttons are set to send a packet of data to the APM wirelessly. For example, if i press forward, the button will generate a string "111" to the APM and the APM is set to…See More

i am having a problem from my PDBi was calibrating the escSuddenly my arduino board does not have power (i've check the arduino board and its fine when powered with usb is into it) problem are the pdb is not supplying 5v anymore. (i've check the continuity of the 5v cables both +ve and -ve are ok. i've also plugged in the lipo batt and check the voltage. It shows 0v)please also let me know if there are ways to troubleshoot the faultiness of the pdb.is there any alternative way to generate a 5v…See More