İlhan Başçuhadar
  • Male
  • Ankara
  • Turkey
Share Twitter

İlhan Başçuhadar's Groups

İlhan Başçuhadar's Discussions

PPM Encoder doesn't flash

Started Apr 27 0 Replies

I supplied my APM1.0 through ch3out port by both ESC and BEC erroneously. Then I realized that on the bottom board only red power led lights solid, yellow mux led isn't on, blue ppm led doesn't…Continue

DO_SET_SERVO

Started this discussion. Last reply by İlhan Başçuhadar Apr 7. 7 Replies

Hello, I couldn't success to function do_set_servo command although I have tried many things. I read throughly the discussions on it and couldn't find useful info. APM Planner 1.2.36 and APM version…Continue

Tags: servo, set, do

Crash while minimOSD initializing

Started this discussion. Last reply by Fernando marquez Mar 31. 19 Replies

I installed minimOSD to my zagi style FPV plane. I had trouble with PAL/NTSC fetaure and getting OSD overlay on the video screen was random. I soldered jumpers and didn't use second stage regulator.…Continue

RSSI reading on OSD screen

Started this discussion. Last reply by Dario Lindo Andres Jul 22, 2012. 3 Replies

How can I have RSSI reading on my OSD screen. My setup is APM1+MinimOSD. I already have 0-3.3V RSSI out of my DragonLink receiver in my hand.

Tags: minimOSD, RSSI

 

İlhan Başçuhadar's Page

Latest Activity

İlhan Başçuhadar posted a discussion

PPM Encoder doesn't flash

I supplied my APM1.0 through ch3out port by both ESC and BEC erroneously. Then I realized that on the bottom board only red power led lights solid, yellow mux led isn't on, blue ppm led doesn't flashing.Besides, on the top board, blue power led isn't also on. Apparently some components failed/burned. There is no smoke, neither no bad looking component. APM connects to pc by usb cable. APM connnects to pc by Xbee 900 MHz. When armed Mission planner shows failsafe immediately. I checked all APM…See More
Apr 27
0 Comments
İlhan Başçuhadar replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"Graham thank you very much, I read throughly your discussion. I congratulate you, you achieved your goal. However you finally applied the parachute on your quadcopter and used do_digicam_control. Somewhere in between you could make do_set_servo…"
Apr 7
İlhan Başçuhadar commented on Graham Dyer's blog post It WORKS...!! Fully automated parachute drop from quadcopter.
"Hi Randy, Is there any progress in the issue you created? Will we, Arduplane users be able to use do_set_servo command soon? For a contest FFD2013 we need to release locking pin of 0.5lt water box holder during a guided flight. 3 boxes shall be…"
Apr 7

ModeratorGraham Dyer replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"And here: link"
Apr 7

ModeratorGraham Dyer replied to İlhan Başçuhadar's discussion DO_SET_SERVO
" I got it to work in the HIL quite well and later in flight. Here's a link to my post: link "
Apr 7
İlhan Başçuhadar replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"Is there any succesfull Arduplane do_set_servo application? Would you share your experiences here?"
Apr 7
Mike Boland replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"My Apologies, I was referring to the Arducopter versions not the Arduplane."
Apr 7
İlhan Başçuhadar replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"Mike thanks for your amswer. I searched for 2.7.3 in downloads section and couldn't find. Last Arduplane version is 2.71 and 2.73 isn't already been announced yet. Are you sure from 2.7.3. I defined "Servo out function…"
Apr 7
Mike Boland replied to İlhan Başçuhadar's discussion DO_SET_SERVO
"prior to 2.9 there were some issues with the Do_Commands in the auto scripts. I have been using Do_Set_Servo in 2.7.3 with no problems on an APM1.4 board though."
Apr 6
İlhan Başçuhadar posted a discussion

DO_SET_SERVO

Hello, I couldn't success to function do_set_servo command although I have tried many things. I read throughly the discussions on it and couldn't find useful info. APM Planner 1.2.36 and APM version v2.71. I appreciate to hear if anyone has succesfully used this function or know how to use it. O.K., this command is to be used after a waypoint, there must be a waypoint after this in order the mission script to be valid. I also defined RC5, RC6 and RC7 functions as "manual".See More
Apr 6
7 Comments
Fernando marquez replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"Gabor, on my arducopter apm2.9 my minimosd rebooted but I never lost control of my tricopter. My minimosd is the latest v1.1 from 3dr, and I have the 3dr power module. Osd is also powered with a regulated 12v supply coming from my 4s flight…"
Mar 31
Gábor Zoltán replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"Like i have 3 uBEC onboard.:) I would recommend to everyone to use separate uBEC for every type of systems Gábor "
Oct 19, 2012
James masterman replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"Using a separate uBEC is a very good idea. I have had a couple of crashes due to APM rebooting mid air from a brownout. The rated current limits for BEC's are often wrong (especially the cheap ones) and estimating servo current draw when they…"
Aug 26, 2012
mack goodman replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"thanks İlhan !, So you are saying to remove the solder connections that ties the OSD board together and power it with the 12 volts from the camera/Vtx side?  I know this will make it hot, but I have now mounted it outside so that…"
Aug 26, 2012
mack goodman replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"Having just been through this whole scenario also, I am fairly certain my crash was because of the "brownout" thing.  I think my APM rebooted which in turn caused my OSD to reboot which is what I saw on screen.. My OSD is powered…"
Aug 26, 2012
İlhan Başçuhadar replied to İlhan Başçuhadar's discussion Crash while minimOSD initializing
"Mack, after the crash I have been experimenting this setup for a couple of weeks: MinimOSD is powered by APM, but I supply APM by a seperate BEC which is powered by the main battery. This battery also powers the brushless motor. I supply the…"
Aug 26, 2012

Profile Information

Hometown:
Ankara

İlhan Başçuhadar's Photos

Loading…
  • Add Photos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 Mapping Mission Ride Along

Mapping Mission Ride Along
3 HD video for UAV's

HD video for UAV's
4 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
5 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
6 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
7 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
8 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
9 How to analyze a crash?

How to analyze a crash?
10 ArduVTOL

ArduVTOL

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service