"From my experience, if you are going down the cat path, look to keep the inside edges close to vertical. This provides minimal bow wave toward the middle of the boat which is important if you are installing a sounder. Also consider a…"
You are right, I haven't mate the files public as I desined them for a commercial project however PM me and I will see what I can do for you. They would require some mods to fit your hull dimensions but that is easy enough. Anyway, here…"
"David, here is a quote from the Bluerobotics website forums where we have been discussing vector mounts. I ran it for another 2hrs today, this time in salt water. I pulled the trust tubes out and it is still looking good.
This video shows just…"
I am also working on mounts for the T100s. I wanted a vector able mount so I could get rid of rudders. Here is my design I am getting 3d printed at the moment. The fist shows the integrated servo mount. The second shows the T100 mounted to…"
"Phil, I understand the weight issue. Being made from Carbon Fibre, the hull weighs around 2-3kg. the biggest weight is the batteries. What sort of run times are you trying to achieve? I am installing 2x 12V 19Ah LiFePo4 (1.5kg each) as I want hours…"
I am making a hull for a commercial sounder/transducer and GNSS equipment. The boat is capable of 20kg payload so the heavy transducers and good size batteries can fit. I am fitting it out with vector able thrusters but fixed thrusters with…"
"Could the precision of the data be the issue?
I was looking at the output in the CLI and all I was getting was "............"
I accidentally touched the RX/TX pins and then I got "NMEA Lat: 0, Lon 0, Alt: 0m, #sats: 0"…"
"I am now trying with a Novatel FlexPak6 (Leica GNSS have Novatel boards so it is the same messages anyway).
I have tried with GGA, RMC & VTG. I have read numerous different posts stating different message types so if anyone can give me a…"
I have tried GP & GN. I can easily define this in my GNSS unit. I have also set my GNSS to GPS only. I will save some sample data and post it on Monday.
Is there anyone in the Brisbane, Australia, region that would like…"
"I am keen to find out how to get this working. I am using a Leica GNSS receiver in a large rover project but I can't get it to read the nmea. I have it at 38400, sending GGA, GSV & GSA @ 5hz. I have checked the output with Putty and it all…"