"Hello to all. Since the conversion to 2.6. I did not receive data from the APM2 to  Ardustation with Heino's software 2.0.15. Heino has helped me a lot. Since I do not have appropriate measuring means, he made a program written…"

"Hello Heino yes I had connected  APM2 and ArduStation in that way. The 3DR radio module was no longer connected. Flight data or parameters are not sent (have requested) Can you imagine that there is a timing problem? Thank you for your…"

"Hello Heino. Copter-module and PC module work with Mav1.0. The module from the Ardustation also runs on the two sides (Copter + PC) Ardustation with 2.0.15 and Mav1.0 shows no heartbeat. Even if I connect directly Ardustation and Copter with cable,…"

"I don´t think the baby found home! It looked to me as if it was in a near-Earth orbit ;-)   Joachim"

"Hello Heino. I think I've found the error. The Atmega 328 in the Station is probably defective. I'll get a new one, then try again and report in a few days. Thank you for your trouble. Joachim"

"Hi Heino, Ardustation reports Mavlink 1.0 at startup. But no Heartbeat. Hope you find something in the software and there is no problem of 3DR radio. Can not imagine it with, because it has indeed worked well with Mavlink 0.9. Hope it will not be a…"

"Hi Heino, your 2.0.15 worked well with the ArduCopter 2.55. (with Mavlink 0.9) After updating to ArduCopter 2.6 and Ardustation Mavlink to 1.0, I have no real function, with the Ardustation ;-( There appears no heartbeat. You had…"

"Deutsch Englisch Französisch Alpha Heino, Thank you for your work. Am I the only one who benefits from it? "

"Seb, i would like to help you, but my english is sooooo bad. Maybe there are any user who could it explain to you. I will watch the forum , and if nothing happen, i will try it to draw. Regards Joachim"

"Alex, I have no idea why the ArduStation resets Joachim"

"Hi! Nice things you are doing here. If I want to use the Ardustation for Antennatracking only (with Missionplanner), i have to connect TX from 3DR module to the 2nd pin of XBee socket on Ardustation. Do not connect RX. Then it works for me. I put RX…"

"  "Pan.Write(180.0-Bearing_Home); // reversed pan servo rotation" Heino, i had to change the pan servo rotation, but with the big W in "Write" it gave a mistace. It must be written with a small "w", now it…"

"  Heino, THANK YOU for your work. Works well! Joachim"

"Heino, where can I find the version? Joachim    "

"Hello. I have 3 modules.(all the same). One on the PC (connected by the FTDI-style pinout and USB connector), one in the Ardustation and one in the Copter. All modules with same configuration. You can always have one connection…"

"Hello Sorry, but my English is poor. I added a module in my 3DR Ardustation and it works well. You must take the Rx and Tx ports of the XBee socket and 5V and Ground of the contacts under the buzzers. "