"Thank you for the response.
Per your advice I downgraded back to Arduino 1.0.1 and was able to install APM 2.5.
Thanx agian."
Joe's Discussions
APM 2.60 Downgrade
Started this discussion. Last reply by Joe Sep 7, 2012. 2 Replies 0 Likes
Does anyone know how to downgrade from APM 2.60 back to APM 2.50 using the mission planner?I have tried using arduino to reload the 2.5 like the old days but receiving multiple compile errors.Continue
direction velocity winds aloft
Started this discussion. Last reply by Michael Oborne Aug 23, 2012. 1 Reply 0 Likes
In 1.2.6 the vel and dir display worked properly.I am currently using 1.2.7 and the dir/vel readings are zero any thoughts?Continue
Jumpy Airspeed
Started this discussion. Last reply by Joe Aug 31, 2012. 2 Replies 0 Likes
Anyone know how to dampen the airspeed indication on the mission planner?While flying the airspeed indication slews +- 10-15 mph. For example when stabilized at 25mph the airspeed indication jumps…Continue
Not getting any AMP data
Started this discussion. Last reply by Doug Weibel Aug 18, 2011. 2 Replies 0 Likes
Hi, Just curious if the Amps readout is functional at this time?I am not able to get anything other than a zero after running the motor at 40% throttle for an extended period of time.I am using…Continue
Joe's Page
Latest Activity
DeveloperMichael Oborne replied to Joe's discussion APM 2.60 Downgrade
"the guides are here
http://code.google.com/p/ardupilot-mega/wiki/Programming
also make sure you are using arduino 1.0.1"
Joe posted a discussionAPM 2.60 Downgrade
Does anyone know how to downgrade from APM 2.60 back to APM 2.50 using the mission planner?I have tried using arduino to reload the 2.5 like the old days but receiving multiple compile errors.See More
Joe replied to Joe's discussion Jumpy Airspeed"Thanks for the response Michael.
The problem was I moved all my hardware to a new airframe and was getting cross talk between the A/S sensor (long untwisted leads running parralel) and the 900mhz xbee. Twisted and rerouted…"
DeveloperMichael Oborne replied to Joe's discussion Jumpy Airspeed
"please check your sensor, as typicly it is fairly stable."
DeveloperMichael Oborne replied to Joe's discussion direction velocity winds aloft
"in arduplane 2.6 the wind calcs are now done onboard."
Daniel Portillo replied to Joe's discussion AttoPilot 90A/50V Voltage/Current Sensor in the group ArduPlane User Group"The deviation of 0.4V is solved with the new AMP (1.0.93) and his firmware update, but the current sensor don't work yet."
Daniel Portillo replied to Joe's discussion AttoPilot 90A/50V Voltage/Current Sensor in the group ArduPlane User Group"I've had the same problem,I did the same steps like your, and I have not yet found the solution. The voltage sensor indicates relatively well, but has a deviation of approximately 0.4V."
David replied to Joe's discussion HK GCS 1.2.75 Lockup"I have been trying all sorts of different things to try and trouble shoot this issue. This morning I was testing it again, and it froze after all the parameters have been read as usual. Well I somehow ended up power cycling the atto while the GCS…"
David replied to Joe's discussion HK GCS 1.2.75 Lockup"Paul, I have been working with Dean to try and trouble shoot potential problems from the Atto side of things. So far no luck there. Here is a link of a video that I made that might helpful in showing my setup and at what point in the GCS is locking…"
DeveloperDoug Weibel replied to Joe's discussion Not getting any AMP data
"The MAVLink protocol does not have a field to report current, so it is not supported at this time. We have requested that current be added and it probably will at some point, but it is not a priority for the MAVLink team."
Joe replied to Joe's discussion Not getting any AMP data"Just a quick update, while flying today I happened to notice on the textual instruments MAH used and voltage are present and working correctly. The Current portion of the text instruments does not present any data, no big deal. I would assume…"
Joe posted a discussionNot getting any AMP data
Hi, Just curious if the Amps readout is functional at this time?I am not able to get anything other than a zero after running the motor at 40% throttle for an extended period of time.I am using version 1.3.16Everything else works (beautifully!), Battery, HDOP, etc...I have option #4 selected in the configuration section and verified that it wrote correctly to the APM.The appropriate MAH value has also been loaded. The Bat % appears to work in the APM Mission planner.Also I receive the…See More
Joe replied to Joe's discussion Need some help with the current sensor.AttoPilot 90A/50V Voltage/Current Sensor"Once again this proves to be a very humbling process.
Previously I had the three 3.9kohm resistors in their respective places to read the 3 cell lipo voltage.
I removed two of them and left one in the AN0 position as instructed in the wiki.
During…"
Joe replied to Joe's discussion AttoPilot 90A/50V Voltage/Current Sensor in the group APM User Group"Doug,
Thank you very much for the response!
Once again this proves to be a very humbling process.
Previously I had the three 3.9kohm resistors in their respective places to read the 3 cell lipo voltage.
I removed two of them and left one in…"
Profile Information
- About Me:
- Fly big ones and small ones.
- Tell us a bit about your UAV interest
- Long range electric sailplane.
- Hometown:
- Lancaster, Ca
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Spanish arducopter Users
83 members
-
Moderators
24 members
-
ArduPlane User Group
682 members
-
ArduCopter User Group
1289 members
-
Andropilot Users Group
182 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
