"The camera comes with a subset of CHDK, I think, as all I was interested in was the remote triggering. The trigger I am using is the PWM CHDK trigger and it works quite well. I have not looked at the camera's scripting ability, and in general…"

"There are a lot of setting to fine tune on the camera and I have squibbed out and left that to the surveyor who is going to use it. In it's default settings on auto it was overexposing the shots and producing white a bit of motion blur. The…"

"Thanks ... 3 seconds still is more than the 2.3sec I have now with my cheap 12MP canon. Is the CHDK v1 delivered by Ricoh? I can not find it back at the CHDK reference website: http://chdk.wikia.com/wiki/CHDK? Also is scripting (typical coded in…"

"Mike, Although I have not used this camera myself, it seems to be rated pretty well.  I wonder if you can play with the settings to "handle" the motion.  The higher the shutter speed the better for motion, so you can lower your…"

"The camera states CHDK v1 and I had a CHDK cable presented to me for version 2 to operate it. With some reservations I hooked it up and it works just fine. The time interval is dependant on the resolution you are shooting. At 10M we find about 3…"

"Hi Mike, I am interested to buy this camera for aerial mapping. Can you point me towards the CHDK firmware version for this camera? Also, what is the minimal time interval between 2 pictures? They define 5 sec in the specifications, but this must go…"

"The usb cable and the video cable both plug into the same port but are different connectors.  They use different pins in the connector.  You cannot use the usb and the video at the same time as I found out.  I send it…"

"I have an older Canon point and shoot camera with CHDK on it (SD750). The problem I experienced with it is it won't allow video out and the usb port to be used for triggering at the same time. When I hook up both, it keeps taking a photo every…"

"Neil, thanks for sharing your progress. Regarding the ISO setting, auto mode versus manual mode settings.  The ISO setting I would set as high as possible, on this camera I believe it is 3200.  These sensors will be able to handle the…"

"Here is a pic that I shot a min ago.  The s95 is doing good so far.  About half the pics are usable.  I think I can increase the usable ones by playing with some camera settings."

"Just got my hexa rebuilt and everything flying.  I attached a couple pics of the setup and camera gimble.  Im headed out this weekend to do some tuning on the camera settings.  Tried taking a couple pics a day ago in auto mode and…"

"Neil....any updates on your S95 work?  How do you like it?"

"What a great blog post.  I have the 123d Catch software ready and will head out this weekend to capture some shots.  Cant wait to try this out."

"Neil How about $80.00 plus shipping for the xbees Kind regards Mehdi"

"Still available.  Price reduced to $120. They are configured and ready to fly. Will ship to Canada and other countries."

"APM 2 sold this morning.  I also have these xbees for sale if anyone is interested.  They are configured and ready to fly.  $120 shipped to the 48 states.   -Neil"