John O'Shaughnessy
  • Male
  • Saint Paul, MN
  • United States
Share

John O'Shaughnessy's Groups

 

John O'Shaughnessy's Page

Latest Activity

John O'Shaughnessy commented on David Anders's group IRIS
"Chip -- you are leaving comments on the "Comment Wall" section of the DIYDrones forum, which is not a great place to ask questions.  (If I were king, it would be disabled.  There is the ability to start a discussion here in the…"
Dec 20, 2014
John O'Shaughnessy replied to Kate's discussion GoPro with IRIS in the group IRIS
"The difference is that if the GoPro WiFi is on, the interference is at your IRIS.  As the signal gets weaker between the IRIS and your transmitter, the likelihood of interference from the WiFi increases.  With you using WiFi from your…"
Dec 7, 2014
John O'Shaughnessy replied to Local Idiot's discussion Droid Planner 2 Edit Multiple WayPoints in the group IRIS
"Thank you!  "
Dec 7, 2014
John O'Shaughnessy replied to Local Idiot's discussion Circular Polarized Antenna For Non FPV Transmitter and Receiver in the group IRIS
"That's a good question.  My guess as to why the CP antennas are talked about/used more with the video is that there is a lot more bandwidth required (not sure if that is an accurate term for analog video, but you know what I mean) for the…"
Nov 28, 2014
John O'Shaughnessy replied to Local Idiot's discussion Iris+ and OSD in the group IRIS
"I've found Christian Elsen's installation guide very helpful as well.  There are many different ways to skin this cat. https://www.cloud-surfer.net/2014/09/28/fpv-setup-for-iris/ I ended up using the 3DR FPV kit (…"
Nov 21, 2014
John O'Shaughnessy replied to John L's discussion Charger Opinions in the group IRIS
"Sweet.  I wish I had known about this option a month ago.  While I'm happy with my solution, yours is a bit cleaner and would have easily met my needs, and had been cheaper too (as I don't yet need to be charging in the field)."
Nov 6, 2014
John O'Shaughnessy replied to John L's discussion Charger Opinions in the group IRIS
"That's a nice looking charger!  Can it output above 50W on AC power, or do you need to go to the external DC power for the higher charging rates?"
Nov 6, 2014
John O'Shaughnessy replied to Paul Jenness's discussion Iris radio and extra channels in the group IRIS
"Mike, did you try a long press on the Menu button instead of a short press?"
Nov 5, 2014
John O'Shaughnessy replied to John L's discussion Charger Opinions in the group IRIS
"I bought a Turnigy 8150. It will require a DC Power Supply as well, but it'll go up to 150W, which as you get larger batteries, will allow you to charge more rapidly. https://www.hobbyking.com/.../__7523__Turnigy_Accucel_8... For a…"
Nov 5, 2014
John O'Shaughnessy commented on Gary Mortimer's blog post New FAA TFR prohibits model aircraft/RPAS flight within 3nm of large sporting events
"This was an existing post-9/11 NOTAM for manned aircraft that was recently updated to include UAV/RPAS aircraft.  "
Nov 3, 2014
John O'Shaughnessy replied to Christian Elsen's discussion FPV setup for IRIS in the group IRIS
"As I mentioned elsewhere, thanks for taking the time to write up some a wonderfully detailed and illustrated guide!  I'll be sure to put this to use as I set up my FPV configuration. John"
Sep 30, 2014
John O'Shaughnessy replied to Mark Prince's discussion Iris+ Upgrade? in the group IRIS
"I've ordered the kit.  The website suggests it won't ship until October 8th.  Some good details of what IS and IS NOT upgraded with the upgrade kit vs. purchasing the IRIS+ as a new…"
Sep 26, 2014
John O'Shaughnessy replied to Gary Hallman's discussion Iris *almost* crash and logs... in the group IRIS
"If you are running the Beta code, I think you will get better/faster answers in the Beta forum."
Sep 18, 2014
John O'Shaughnessy replied to Philip Higgins's discussion 3DR IRIS With FPV Kit Issues NEED HELP
"Great stuff.  Thanks very much for taking the time to summarize and post.  Now that the Iris+ has been announced, including an upgrade kit (supposedly for $200) it'll be interesting to see what happens next. John"
Sep 9, 2014
John O'Shaughnessy replied to Charlie Raley's discussion Taking On A Budget Amature Aerial Video to the next level
"Very nice!  I assume the farmer was aware of your activities beforehand?  Otherwise, I can just imagine him thinking, WTF?" :) It looked like there were power lines diagonally across the field.  Lots of planning went in to the…"
Sep 7, 2014
John O'Shaughnessy replied to Philip Higgins's discussion 3DR IRIS With FPV Kit Issues NEED HELP
"What a great thread and some great, thoughtful replies!  Such a shame this is in the "Unassigned" category, as I usually only view the main page and the IRIS section.  I wonder if this can be moved to the IRIS discussion area? I…"
Sep 6, 2014

Profile Information

Please tell us a bit about your UAV interest
Interested in getting better at RC copters. Interested in photography, FPV, and autonomous flight.
Hometown:
Eagan MN

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service