"Looking furthur, the default paramaters shipped with 2.63 has aspd_use == 0. Enabeling the airspeed sensor using MP only sets aspd_enable== 1. As I see it the only way that you can get air speed indication on HUD is to set the aspd_use manualy in…"
"Andrew ; It seems that the configuration of hardware in MP sets the aspd_enable to 1 but fails to set the aspd_use to 1 when airspeed hardware is enabled. I set the aspd_use to one manualy and the airspeed works fine on the HUD. The airspeed…"
"Asaak - Question Have you resolved your problem? If so, what resolved it?
I am still having major problems with AP 2.62.
Just to check my hardware I loaded Arducopter 2.73 without erasing or anything else. Arducopter loaded without problems.…"
"Now for ArduPilot....
WARP-4 Brushless (RCBL415-5 inrunner) no longer available
APC 6X4 Sport Prop
Blue 3s/30C 2200 mAh Lipo
ArduPilot/V2 shield/AS sensor/FMA XY & Z ir sensors.
This aircraft flys better than the post above:…"
I have an easy* that has about15 flights on it using Ardupiolt with V2 shield. I fly out of my back yard to take aerial shots of our property. This ia a very relaxing system that has many uses. Jason please continue. AP is a very…"
"When I say no AP data I do not have any thing connected to the netbook. I am not referring to "ArduPilot" but Auto Pilot in general. Am I correct in that ArduPilotMega will show something? Or better yet I'll start back at the…"
I have it running on the following setup with no Auto Pilot data just GCS:
Acer Aspire One
Intel(R) ATOM(TM) CPU N270 @ 1.60GHz
32 BIT Windows 7 Home Premium
160GB duel boot Ubuntu/Windows 7
Now is time to crank up my…"
"Hello James Goppert,
I asked about your GCS being able to run on a netbook (ACER 10"). I have a Ubuntu Partition that I run Paparazzi on. The Windows 7 Partition is doing funny things with all Ardupilot , ArduPilotMega GCS's.…"
"Doug Weibel, I am running three "Sketches"
ArduPilot 2.7 - Flying - EZ*
ArduPilotMega - on bench - input/output done at least to the point of final decisions as to GPS MTK/uBlox,
powering of servos optcoupler on output/Mega option, Comm…"