"If I install Xplane on my mac will it be able to connect to the mission planner running in VM Fusion on the same mac? Justin"

"so after digging around a bit, i found out what seems to be the problem, on the config.h there is a ch3 trim that the default is set to 1100. after changing it to 1050 the throttle actually went up so then i raised the value to 1200 and all seems to…"

"@ Torin This is what i came up with // How many points are you entering? #define COMMAND_TOTAL 4 #define WP_TOTAL 3 #define WP_RADIUS 30 #define LOOP_WAYPOINTS 3 // # of times around the pattern #define ABSOLUTE_WAYPOINTS 1 // 0 = relative, 1 =…"

"Is there a how to for the Waypoint_writer_Mega.pde Thanks"

"I was able to get a GPS fix within u-center by using the passthrough code. I did need to change the serial speed to 9600 with the passthrough code. However once i loaded the the APM_1_0 code i am unable to get anything from the GPS. I do not get any…"

"@Martijn I just went through the same process. ArduPilot Mega Mega IMU ( the $150 ver that comes with the correct pin headers) 3x8 Right Angle Pin Headers(qty 2) Ublox, Ublox adapter, Adapter cable Servo extensions( to connect the mega to your RC…"

"Yes, I guess. I'm not sure what you would have to do to get 2.6 to run on Mega. You would have to change the RC input to fit the new hardware.... But actually I think Mark C. or someone has done this. So if they have then yes it should…"

"@Doug, For now, if someone runs ArduPilot v2.6 on Mega, config tool should work, right?"

"Doug, wasnt that the plan to include this into the GCS? Happy to try, think Auto`s considering the same thing, im sure we can work it out between us (not that more help would not be appreciated) Have i missed the point? Mike."

"No, and we need someone to write a new config tool, and it needs to do more things, etc. Anyone interested contact me."