Hello, everyone. I am sharing how to connect Benewake TF LiDAR to Arduino.May this helpful. Step 1: Hardware Connection The linear order for the LiDAR products of our company is defined as: red…Continue
LiDAR and RADAR remote sensing are some of the most common remote sensing techniques in use today. LiDAR uses light rays or lasers to send and receive signals while RADAR uses radio signals to send…Continue
"Thank you David.
Yes, TFmini LiDAR works well with Pixhawk and Arduino.
Would you please leave your e-mail address. Or you can contact me firstname.lastname@example.org at ease.
I will send you the instrume data."
"All right. Hope they can solve the problem soon.
And I am curious about the test of TFmini, the blind area of TFmini is 30cm, that is actually right. Have you set it in a drone? Or what do you use it for? Beyond the 30cm, does it work…"
"The Lw20 has a waterproof enclosure so it is not possible toe solder wire to serial output , you have to send back the unit to a lightware assistance center.I just did a short test with the TF-mini , I do not like the fact that…"
"In fact, you donnot need I2C to connect TFseries, and you can weld the end of the wire of TF series to connect to any port as you like.
And it may help, you can check the data of TFmini in http://www.benewake.com/en/down.html or contact the…"
"I recently bought three Lidars.Lightware LW20/I2C , LeddarOne and Benewake TFmini, the last two with serial connection .
The Lw20 has an interesting feature to drive directly a servo to scan and could be use for obstacle avoidance but beware , do…"