"If risks are understood and mitigated then there is no problem. It is not generally recommended due to the risk of injury. However, with good prior planning and full safety equipment it can be helpful. For myself a full face helmet and suitable all…"
"This blog post did not violate any of the terms of service and therefore it still stands. Personally speaking and independent of my "admin" role I see no issue either. I'm contracted for duties that include the term bombing, water and…"
"I respect your opinion, just not getting the same experience as you. I've purchased around the same amount but I will not use them anymore. The last item took over six months to arrive in Australia (via Seychelles!) and this is not an isolated…"
"i would seriously disagree with banggood being a good site, but that's just my own personal opinion based on many years of nightmares with them- I accept that your experience may differ however. For me they are right down there the likes of…"
"The "drone strike" at Heathrow was retracted very shortly after the initial claim, it was thought to be a plastic bag. The problem with repeating sensationalistic rubbish as fact is that it makes your piece sensationalistic rubbish as…"
"Yeah, that's the beauty of these small machines. It's hard to tell the damage exactly without having the board in front of you but it looks toasted and going by your description it's more than likely terminal (considering the cheap…"
You asked: "Hi David, I have noticed your comment regarding the link in the blog post, what is giving you that impression- password request or malware? Thanks."
I was a little surprised when I selected the link
In selecting the…"
"I've been 3D printing aircraft for a while now, the trick is getting a lightweight but strong wing section comprised of multiple parts that most 3D printers can manage. These days I print the outer skin with abs or petg in 150mm sections with a…"
"That's great, will do. I've heard good things about HT-PLA, it's supposed to be super strong. The best thing about ABS is the cold vapour treatment. It gives an amazing finish but I much prefer PETG these days- it's very durable…"
"Hi Adrian, would it be okay if I used your aircraft in my design and 3D printing class at my local primary school? I know the kids would get huge enjoyment in seeing your design come to life -into an aircraft they could actually fly!"