Hello,I added voltage battery monitor to my ardupiltot. I dont use PM (power module) wiring, so I changed the pin 12 and 13 to 1 and 2 in advanced parameters. But after some time the AP forgets the…Continue
Hello,I added voltage battery monitor to my ardupiltot. I dont use PM (power module) wiring, so I changed the pin 12 and 13 to 1 and 2 in advanced parameters. But after some time the AP forgets the new parameters (1 and 2) and changes back to 12 and 13.(also, the comment for the BATT_VOLT_PIN is "...current sensing in pins A0...A13")Any ideas?See More
"I resolved it, but I quite dont exatly remember how.
I think I installed earlier verion of MP on another computer...and even that did not work.
Maybe I messed something with Ardunio code. Or got an update for MP.
Sorry, It was too…"
"My GPS problem:
As we can see on picture, we have Satcount (8 sattelites). But seems like MP dose nothing with that info, and displays GPS: NO GPS.
In some mysterious reasons this happens Only with teoglas signed GPS (numbered 1 on…"
"Quite agree, there are gaps in the info. I thought maybe the Trim throttle was for non ASI equipped aircraft. And what does the ‘air speed corresponding to max throttle FBW-B’ do? (standard parameters).
Im still not really sure…"
I think this is what u look for:
Reset Mission Channel (ArduPlane:RST_MISSION_CH)
RC channel to use to reset the mission to the first waypoint. When this channel goes above 1750 the mission is reset. Set RST_MISSION_CH to 0 to disable."