"I'm in Malabar Palm Bay area near Melbourne"

"mp 1.2.33 should fix this, for good."

"Here's a short video describing what I mean...   <iframe width="560" height="315" src="http://www.youtube.com/embed/SNAdwAwn8-8"; frameborder="0" allowfullscreen></iframe>"

"I’m having this same problem but my work around is not having to shut down MP but knowing if I’m going into Terminal to retrieve the logs, I click the Terminal button the second time once confirmed connection is good the first…"

"i think this problem should be fixed. its all to do with how quickly you press log download..."

"I had this issue last night.   However I think the issue is unrelated to admin access. It appears that having the mission planner connected is causing problems with the terminal session.  Mission planner connection is occupying the…"

"I confirm this on win7 64 bit. I am a .net developer for day job. Was connected in mission planner 1.2.14 mav 1.0 using an amp2 with 2.8.1 firmware and could browse config etc. Hit the terminal tab, terminal connected but top bar switched to…"

"A big thanks from me also. This helped a lot"

"I will give that a check Monday. I am also thinking of letting it sit in the garage for a few hours for weather acclimation. The only things that are common are the receiver and the board. A Land Rover can be a difficult animal I would think, lol."

"OK, still puzzled. I got my board back Friday along with a SDR ArduCopter Hexa-B Frame and motors kit which included the ESC's. I put it together Friday and Saturday and set it up. Still the same problem. I t will not boot all the time. Most of…"

"The mission planner needed to know that you were an administrator? If so, I will check that out. Thanks"

"I have the same problem trying to download the logs, "error opening com port". If I run the Mission Planner (1.2.14) as an administrator, then it worked."

"Craig, my board should be back to me Friday. As I mentioned I will get my O'scope out to look at the voltages. I hope the scope still works. I used it a few months ago for something. Where exactly would be the best place to monitor the…"

"I personally would recommend, unless you feel very confident with programming the APM, that the upgrade to 2560 board is the less painful, option. I would guess that a build with the CLI and LOGGING disabled is untested as part of normal QA and or…"

"I didn't pick up on the part where you booted it up at 300'. I thought it was flown to 300'. I boot it up on the second floor and it works fine. I shut it down, go downstairs and it doesn't boot up. I take it back up the stairs…"

"You might be right. My temperature goes from 76 inside to maybe 86-88 outside. I really don't think temperature is a problem here. At least not in my case. Maybe in Germany where it's getting cold(er). That and the humidity and altitude…"