"Why would one need a barometer on a cam? I doubt that it is what is on this board. No doubt an interesting concept, but implementation by means of paying for a license is a joke specially contrasted with the open source.
Could be an…"
here is my last setup :
- custom IOIO board for interfacing with the Android tab and receiver of the Frsky telemetry link.
- custom pic 18f46j50 board for ppm output, rf22 433mhz telemetry link and serial bluetooth
I also added 2 PSP joystick…"
"Hi, I could use some help!
The current situation is such that I'm trying to select the hardware that will be properly suited for this application. I was thinking about Samsung tablets like 10.1 tablet due to favorably placed connector from the…"
"Nice work. I have had also similar ideas. My approach is a little bit more embedded. It is based on mbed controller, 4D touch screen, xbee and mavlink. Currently I have only the basic MAVLINK messages working with GCS and tested with modified UDB 4…"
Connecting through USB was attempted (and almost entirely implemented) in a private branch of copter-gcs. However, the tested (unmodded) android phones/tablets didn't support USB/Serial comminication, so the options was let go to avoid…"
I used a custom IOIO board that take power from the tablet and not the opposite (but you can still power it with a battery).
If you look carefully at my blury video, you can see that this is not the IOIO that is driving the servos, the IOIO…"