"Can anyone verify that pin 3 is the airsensor on the v2 of the shield"
Rik Vlaming's Discussions
Ardupilot Shield V2 schematics?
Started this discussion. Last reply by Charles lakins Oct 21, 2012. 16 Replies 0 Likes
Hey all,just received the new Ardupilot Shield V2. Just looked around a bit on the site and didn't find any schematic of it. Will this become available soon?Ciao,RikContinue
Rik Vlaming's Page
Latest Activity
Rik Vlaming replied to Richard Green's discussion Printing Ardupilot Sketch Files"The Arduino IDE is pretty poor regarding this. Try getting Textpad. In the options you can set to show .pde files as C-files, which in turn enables nice syntax highlighting. Also printing goes well. If I'm able to find the right commandline…"
3D RoboticsChris Anderson replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?
"The community is hard at work on the hardware designs (using Eagle files) in our Huddle workspace groups. If you want to join one of those groups, you just have to ask.
The Arduino reference designs are distributed under a Creative Commons licence.…"
XV replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"I am really concerned by this lack of transparency with the PCB files. This makes me wonder if this is a true open source project or a kit retailer operating under the guise of one. How do you expect the community to contribute usefully to the…"
Faisal Shah replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"Is there any specific reason? The eagle files for the Ardupilot are posted, for which this is a shield board. Anywhoo, thanks for replying - I've been lazy, I'll just take out the half hour and make the library parts I need :)"
3D RoboticsChris Anderson replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?
"We don't distribute Eagle files, I'm afraid."
Faisal Shah replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"Can I get the eagle files for this. I've asked a few times in a couple of different places ... Is there any issue in posting the eagle schematic and layout? How about the footprint for the pressure sensor?"
Richard Green replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"Michel,
I have just bought the Ardupliot board, the v2 shield and a em406 GPS. I wanted to use the 2.1 ardupilot code as I do not have a z-sensor (I have the x-y sensors from my FMA CPD4). Can I use the v2 shield with the 2.1 ardupilot code or can…"
Hessel replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"What are the limitations of the V1 shield I have v.s. the new V2 shield ?"
3D RoboticsChris Anderson replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?
"Also select the right shield in the config file (1-1)"
Michel Lubbers replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"Hi Shawn,
You have to download the newest V2.4 firmware.
http://code.google.com/p/ardupilot/downloads/list
Good luck!
Michel"
"anyone having troubles getting signal lock with this shield, cant seem to get it. im useing the em406 useally locks on greeat"
3D RoboticsChris Anderson replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?
"Yes, it includes the pressure sensor."
Multimull replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"hi All,
I am just clicking together my first order @ the DIYdrones store, planning to build my firest Ardupilot on EZ* platform.
Ive read lots op post here on the forum and RCG as wel, so I am fully confidiend in getting it up&flying in…"
Darro Lin replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"I ordered this board as the economic option before the version with the 3.3v regulator was available. I want to solder on the 3.3v regulator now. I'm looking at the schematic... I need to add C4, C5, and U3. What part should I use for U3? I…"
Rik Vlaming replied to Rik Vlaming's discussion Ardupilot Shield V2 schematics?"The schematics and board-layout are available now :) Assembled the board without remaining questions, and ready to give it a new home in a Twinstar :)
Some quick links:
Schematic : Schematic
Layout : Layout"
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Documentation Editors
51 members
-
Moderators
24 members
-
ArduRover User Group
184 members
-
ArduCopter Italian Group
87 members
-
ArduPlane User Group
682 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
