"Hi,
Try see my msg here about how to get UART0 mux and UART2 running at the same time. That way, you can connect the BT to one port and the OSD to another, and use both at the same time. When USB is plugged, the one on the telemetry port will…"
Ruben Wijnhoven's Discussions
How to bleutooth + minimosd?
Started this discussion. Last reply by Søren Kuula on Saturday. 1 Reply 0 Likes
How do I get to run the minimosd + bluetooth together on the apm? They both need the greem wire to function. But if i do that BT only recieves and cannot send. Anyone have a solution for this?Continue
Imu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP
Started this discussion. Last reply by Ruben Wijnhoven May 27. 2 Replies 0 Likes
I have my Imu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP? Yaw 90 or Yaw 180?Continue
How to let waypoint automatic erase after power cylcing?
Started this discussion. Last reply by Ruben Wijnhoven Apr 28. 1 Reply 0 Likes
I really like the channel 7 waypoint feature. But how can I set the arducopter up so that after a powercycle it will erase the waypoint. Now i every time have to erase them through my laptop. I want…Continue
apm 2.5 off center
Started this discussion. Last reply by Dwgsparky Mar 22. 5 Replies 0 Likes
I just bought a flying wing i want to use the apm 2.5 on for stabelise and rth. Only problem is i can;t mount the apm center. I will be about 7 cm off center to the left. Is this possible or a no go?Continue
Ruben Wijnhoven's Page
Latest Activity
Ruben Wijnhoven replied to G.S. D.P.'s discussion Mission planner over HK bluetooth.."I have the same issue. Never had this issue with an older version of the MP."
Ruben Wijnhoven posted a discussionHow to bleutooth + minimosd?
How do I get to run the minimosd + bluetooth together on the apm? They both need the greem wire to function. But if i do that BT only recieves and cannot send. Anyone have a solution for this?See More
Ruben Wijnhoven replied to Ruben Wijnhoven's discussion Imu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP"tnx yaw 90 did the trick."
Søren Kuula replied to Ruben Wijnhoven's discussion Imu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP"Hi,
well 180 would be if it was pointing back.
Try 90 and see in Misison Planner. The horizon should react normally to pitch and roll (bule sky with nose up, and horizon on the display tilts left when UAV rolls right)
Regards
Soren"
Ruben Wijnhoven posted a discussionImu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP
I have my Imu rotated 90 degrees to the right it is horizontal now with arrow to the right what to enter in MP? Yaw 90 or Yaw 180?See More
Ruben Wijnhoven replied to Andrew Tridgell's discussion ArduPlane 2.73 released"why did you remove manual level."
Ruben Wijnhoven replied to Ruben Wijnhoven's discussion How to let waypoint automatic erase after power cylcing?"no one?"
Ruben Wijnhoven posted a discussionHow to let waypoint automatic erase after power cylcing?
I really like the channel 7 waypoint feature. But how can I set the arducopter up so that after a powercycle it will erase the waypoint. Now i every time have to erase them through my laptop. I want them to be automaticaly erases after every power cycle. So I can use channel 7 to set them up every flight.See More
Ruben Wijnhoven commented on Trent at MyGeekShow's blog post MyGeekShow finally flying with the APM again"Trent, could you post your settings?"
Dwgsparky replied to Ruben Wijnhoven's discussion apm 2.5 off center"My 50inch wing has the APM embeded 4 inches (10cm) to the right of centreline ) no problems at all, its also 3 inch in front of the CG.
without the APM the wing would turn sharper to the left (torque) , With the AMP in the right wing the turn is the…"
Ruben Wijnhoven replied to Ruben Wijnhoven's discussion apm 2.5 off center"Will let you know as soon as I start building the wing."
ModeratorGraham Dyer replied to Ruben Wijnhoven's discussion apm 2.5 off center
"In most cases the effect will be in the order of a few percent, in other words: likely not enough that one would even notice the difference.
If you can't get the location exact then don't worry too much, place it as close as you can and IF…"
Jan replied to Ruben Wijnhoven's discussion apm 2.5 off center"It should be nice to have an option where you can define a center offset. I'm facing the same problems when mounting my apm into the TBS Discovery. It is not 7cm off likr for Ruben but still, it is not dead center."
ModeratorGraham Dyer replied to Ruben Wijnhoven's discussion apm 2.5 off center
"For the gyro's it doesn't matter, for the accellerometers it does. Center is ideal, especially laterally."
Ruben Wijnhoven posted a discussionapm 2.5 off center
I just bought a flying wing i want to use the apm 2.5 on for stabelise and rth. Only problem is i can;t mount the apm center. I will be about 7 cm off center to the left. Is this possible or a no go?See More
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Nitro-powered Arduplane …
15 members
-
ArduPlane User Group
721 members
-
Andropilot Users Group
203 members
-
ArduCopter User Group
1356 members
-
DIYDrones News Team
5 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
