"Hi Leo Delighted to get help with sanity testing and refinements, and also to learn more about your airframe. We are edging closer to flight tests with the new tail assembly in the UK. Just out of curiosity, where are you based? Shane"

"Hi there! Sorry for the slow reply. I would love to get in touch and discuss OpenRelief. Let me know when you have time. Shane"

"Bear in mind that the GNU GPL was written for software. It is probably best to use a license designed for the specific purpose in mind. If you want to license documentation, then things like CC-By-Sa make sense, though when it comes to Open Hardware…"

"Hi Rob Over at the OpenRelief project we have been considering this, and gas engines probably will work best in wet weather. Regarding the airframe, material like foam and balsa might have some problems in wetness and wind, so we are currently…"

"Hi Brian Over at the OpenRelief project we have been considering the issue of powerplant as well, and have come to the conclusion that gas engines probably work best for all-weather endurance. Our current airframe…"

"Hi Leo I thought you might be interested in the Open Source airframe that we are developing over at the OpenRelief project. The design was donated by Edward Strickland, a gentleman with a degree in aeronautical engineering, experience with Open…"

"It looks like this project has stalled (also in another thread: http://diydrones.com/forum/topics/open-source-uav-airframe?xg_source=activity&id=705844%3ATopic%3A107318). However, perhaps everyone will be interested to note that an Open Source…"

"It looks like this project has stalled. However, perhaps everyone will be interested to note that an Open Source Airframe has just been released by the OpenRelief project.  Here is an overview of the specs: * Length 1.4 meters * Wing span 1.8…"

"It looks like this project has stalled. However, perhaps everyone will be interested to note that an Open Source Airframe has just been released by the OpenRelief project. Here is an overview of the specs: * Length 1.4 meters * Wing span 1.8…"

"Yeah, we had hoped Karl Lattimer from Newcastle, one of the project co-founders, would attend to go into details. However, something came up at the last minute, and my (admittedly lame) video was the stand-in. I'm sorry for that, and I hope…"

"Hi guys! Apologies for the slow response. I plan to post more specific data about OpenRelief on the forums shortly. Just to super-quickly address some of the comments above, we are using the Ardupilot for the autopilot, and there are two prototype…"