Hello, can anyone explain in full detail how Simple mode is designed to work?From arming the motors in Simple mode, to flying, changing yaw angle intentionally, switching to other modes, etc.Is it…Continue
When flying Simple mode, I notice it seems to work ok, until I adjust the yaw angle..then it becomes unstable, wants to yaw left and right until it is not flyable. You have to bring her down at that…Continue
I know this is an old topic, but when I am trying to use your RSS, the information I got using RSS is limited to links to new post (see below an example), but not a short description. I know others RSS feed provide some short description…"
"Being the I2C has a high impedance it will be neat to see how some conquer adjacent interferences.
I do like is the idea to have less latency with needed control response with a very small light copter.
"I am fairly decent at flying nose-in and flying with good orientation in most attitudes.. For me simple mode (which i tested today with 2.0.34) was rather difficult for me to fly UNTIL forcing myself to stop trying to fly the nose.
"i have the same issue
i enable compass and i even do the offsets manually
i go for first flight after that it flys alright as soon as i land it starts goin ccw 45,90,180 degrees on takeoff
i turn the compass off and the copter flys great.
to me it…"
What concerns me with letting it spin, is that I'm not confident in the aircraft yet, and its not comforting hovering the copter whilst its spin being totally reliant on the APM to translate stick direction into the right amount…"
"First, please always give the version number of the software you're using when filing reports. It's impossible for us to give you advice if we don't know which version you're using.
Second, the whole point of simple mode is that…"