What little hair I have is puled out!! I'm working my way through setting up an apm 2.6 for the fist time and am stumped. I'm using Afro 30's and have calibrated the radio and the ESC's but when I…Continue
"I don't have trouble with the front grommets but the back one came off with any speed. It's a small hole drilled in the post and a retainer wire. Works great. After a couple of cheap lea6's got flaky I bought the CSG unit with the…"
"Here's what I did with mine. The base plate is made from PCB material and is grounded for a second ground plate. For the cover I made a simple wooden mold and heat formed some plastic cut from an old black waste basket. The post is some 6mm…"
"A couple years ago I was having problems with the internal compass offset being too high. Using a tape head demagnetizer on the compass chip and surrounding metal screws (mainly the chip) cleared the…"
"It will be fun to follow the newest exploits in Ardu-world version 3.4. I know this won't be high on racer's lists (this thread) but one thing I wold love to see added to 3.4 is broadening the options for other gimbals, in particular the…"
"I don't know if this is the place to ask but I can't find much information and I'm curious about the status of Copter 3.4. I see there is work going into getting it to work on PixRacer but I can't find anywhere where 3.4 is in…"
"I hope the new organization is taking shape and thank you to all the developers that have put so much into Ardupilot over the years. It is very difficult to find any information on Copter 3.4 development so I hope someone here can give some kind of…"
"Maybe Randy or someone can answer this. 3.3 works with the Tarot 2d gimbal, does it also work with the Tarot 3DIII, and if not can this be included in 3.4? What I see of the 3DIII so far, it is a good and inexpensive gimbal. Also I am awaiting…"
"I fear for 3DR as they, sadly, seem to be falling behind. Hopefully this is an indication that they will be using the Snapdragon but, whatever the case, it is good to see Arducopter being ported to another platform. I'll be watching closely!"
"I had the same issues. Once I set the "Throttle Max" parameter from 80 to 1000, I then had to recalibrate the ESC's to recognize the new throttle high/low values. After doing that, the motors would spin up with the…"
"I had my first EKF inconsistency error today. I've been flying 3.3 rc5 for many flights over the past weeks with no errors but this occurred at take off and my quad flew fine in Stab mode but anything using GPS was locked out. I landed and…"