Terry McKinley
  • Male
  • Godshill
  • United Kingdom
Share Twitter

Terry McKinley's Groups

Terry McKinley's Discussions

APM mission Planer in the field

Started this discussion. Last reply by Terry McKinley Jan 7, 2013. 2 Replies

tried the mission planer away from any internet access and unable to use it can anyone ?.if so how it had no firmware available and no google maps am I missing something.Continue

 

Terry McKinley's Page

Latest Activity

Terry McKinley replied to Nilesh Sutar's discussion increasing no. of blades
"Multi bladed propelers are used when you need ground clearence or less noise they are less efficient at the same rpm so you have to run them faster. why less efficient because the time befor the next blade cuts the disturbed flow from the blade…"
Mar 15
Terry McKinley commented on Sandro Benigno's blog post ArduCAM OSD v2.0 - Update your MinimOSD!
"failed to talk to bootloader minim osd and mavlink osd is all I get when I trie to update firmware or settings have tried two diferent ftdi interfaces that work ok on my gps etc but not these two osds, the update charr set apears to work ok. has…"
Dec 6, 2013
Terry McKinley replied to Randy's discussion AC-3.1 autotune support discussion
"Nice autotune on a HK Hal quad 2830 on 10x5 pprops. keep up the good work"
Dec 1, 2013
Terry McKinley commented on Luke's blog post How to Program 6 Flight Modes for ArdupilotMega - JR 9303 Example
"This works on a DSX 9 thanks"
Oct 6, 2013
Terry McKinley replied to Terry McKinley's discussion APM mission Planer in the field
"Thanks will give that a go"
Jan 7, 2013
Stephen Dade replied to Terry McKinley's discussion APM mission Planer in the field
"You need to cache (save to disk) the maps before you head out. You can do this by going to Flight Planner -> Right click on map -> Map Tool -> Prefetch. It will cache the map area currently shown in the Planner window. The firmware is…"
Jan 7, 2013
Terry McKinley posted a discussion

APM mission Planer in the field

tried the mission planer away from any internet access and unable to use it can anyone ?.if so how it had no firmware available and no google maps am I missing something.See More
Jan 7, 2013
Terry McKinley replied to Terry McKinley's discussion aispeed on a apm 2.5 in the group ArduPlane User Group
"Cheers info now complete"
Jan 5, 2013
Terry McKinley replied to Terry McKinley's discussion aispeed on a apm 2.5 in the group ArduPlane User Group
"Thanks thats what I thought but somehow could not find this pic Cheers"
Jan 5, 2013

Developer
Kevin Hester replied to Terry McKinley's discussion aispeed on a apm 2.5 in the group ArduPlane User Group
"They are already there on the 2.5, just plug into the A0 position.   My airspeed sensor came missing the 3 pin header, so I did have to solder on a .1" spacing 3 pin header. No biggie."
Jan 5, 2013
Richard replied to Terry McKinley's discussion aispeed on a apm 2.5 in the group ArduPlane User Group
Jan 5, 2013
Richard replied to Terry McKinley's discussion aispeed on a apm 2.5 in the group ArduPlane User Group
"Terry - I don;t personally own a 2.5 board, but i believe it is very similar to the APM2 board - In the manual, on this page, the 3rd image down shows the APM pins, and what they do, Airspeed is in the corner... "
Jan 5, 2013
Terry McKinley added a discussion to the group ArduPlane User Group
Thumbnail

aispeed on a apm 2.5

I will ask the same question as someone else who never got an answer.have i got to add pins to the apm 2.5 for a airspeed sensor or are they already taken care of in the row of pins at the top which take the airflow etc.ThanksSee More
Jan 5, 2013

Profile Information

About Me:
Fly helis and fixed wing and real life gliders
Please tell us a bit about your UAV interest
Traditional heli and Quad + fixed wing
Hometown:
Isle of Wight

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service