I'm using APM 2.012 (beta). I have the different modes set up on a rotary knob on the radio, which allows 5 positions (0-4). I use the Command Line to set and save the modes. In operaion, I use the…Continue
"That's a good offer now I just have to decide whether I am going to stick with the APM 1 or go to APM 2.
Don't hold it for me it may take a week to decide which way I will go.
"Hello! The modes were showing up OK in my case in Mission Planner's artificial horizon window; I would switch from Stabilize to Alt-hold, to Auto to Simple, but now it shows nothing and as soon as I reach Auto it stays on Auto, no matter what I…"
"I also disconnected the main power to the servo rails (and the A0 input), while leaving the APM powered via USB. Got a reading of Volts: 1:1.68 2:1.66, 3:1.63, 4:0.00. The voltage is decaying slowly - after about 10 mins, down to 1.34V."
"I'm seeing a similar problem with battery voltage. I'm trying to read total voltage of a 3S setup (presently powered with a 12V DC power supply for testing purposes). I've got a 3.9k ohm resistor on A0 (nothing on or…"
"Chris thanks for the help ha yesterday my first successful autonomous flight in real life. The log looks a bit strange but I think caused by the minimum space I had yesterday for testing the auto mode is the reason for not that precise flight route.…"