"in fact my actual motor is only approx 600W... and push it to 800W for 5 sec. burst...
i would go with this one , only 174g ...best HK quality & good punch…"
ggtronic's Page
Latest Activity
ggtronic commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Lovingggtronic commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving"yes 800w is ok with 3kg AUW X8... this is only for surge peak usage(take off)...cruise speed only need 90 to 150w"
ggtronic commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving"Itzik Ronen : NTM35-42 1000kv... but i would go for the 35-48 1000kv sk3 ...no need for 320g motor !... ESC is 80 but over kill...PLUSH 60 is OK... 12-6 carbon folding prop... 1x 4s5000"
ggtronic commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Lovingggtronic commented on Jeff Taylor's blog post Mapping with E382 and DroneMapper"http://pentax.ca/pdf/o_manuals/om_OPTIOWG2_e.pdf ; i think we need to hold trigger button for continuous shooting"
ggtronic commented on Jeff Taylor's blog post Mapping with E382 and DroneMapper"Denis Deasy: good find this PENTAX ! http://www.dpreview.com/products/pentax/compacts/pentax_optiowg2gps
manual focus... continuous drive 1fps ? not shure if this can shoot for ever ? the remote control will allow many trigering gadget…"
ggtronic commented on Jeff Taylor's blog post Mapping with E382 and DroneMapper"oh congrat about Dronemapper site and many thanks for the GeoTag Time sync hint !"
ggtronic commented on Kirill's blog post IMAV 2012 Review"Thanks to share ! really interesting... i also use FPV mode in conjonction with APM
"
Profile Information
- About Me:
- aerial photography and custom light RCairplane
My multipurpose RC airplane:
http://www.rcgroups.com/forums/showthread.php?t=942611
- Tell us a bit about your UAV interest
- www.rcgroups.com/forums/showthread.php?t=942611
ggtronic's Photos
Comment Wall (1 comment)
- At 7:40am on December 26, 2008,
Venom57 said… - Neat. Great video on your site. I was reading about you planes on rcgroups. I read in there that you were still working in a camera mount. I don't know if you've tried acrylic, but I've been cutting it and bending it for electronics for some time, it's lightweight and very strong and can be shaped, drilled and cut pretty easily. You might try using that for a camera mount. I'm working on a vibration isolated version that I hope to post soon.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
203 members
-
Moderators
24 members
-
ArduRover User Group
207 members
-
Japan ArduCopter Group
58 members
-
ArduCopter User Group
1355 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
