herve pellarin
  • Male
  • argonay
  • France
Share

Herve pellarin's Friends

  • Jethro Hazelhurst
  • Mathieu
  • bruno voisin
  • F5PQL
  • Michael Oborne
  • vova reznik
  • Robert Krogh (hooks)

herve pellarin's Groups

herve pellarin's Discussions

[HELP]ArduPlane no more Throttle after switch to any assisted mode

Started this discussion. Last reply by herve pellarin Nov 30, 2015. 14 Replies

hi folks,finishing my plane, and did some testing.I am facing one issue regarding throttle.In manual mode everything is fine, when i switch to stabilize mode, no more throttle, same for rtl.am i…Continue

Cant get elevator work in the right direction in stabilize mode

Started this discussion. Last reply by herve pellarin Nov 23, 2015. 4 Replies

hi,i am setting a new plane for some experimentations, and i am facing an issue i never had before using apm, that s why i am here on my knees asking your help.ELE is on chan 1 works perfectly in…Continue

[HELP] arducopter v 3.0.1 can t arm it any more and beeeeeeeeeep

Started this discussion. Last reply by herve pellarin Jul 29, 2013. 27 Replies

hi,since i tried to plug my android phone using OTG and droidplaner, my arducopter is a nightmare, can t arm it anymore, sometimes no led sequence (a,b,c) weird beep , radio is fine calibrated) i ve…Continue

Tags: bug, arm, arducopter

arducopter 2.5.4 outstanding loiter mode as good as wkm

Started this discussion. Last reply by Eagle Wong Jun 14, 2012. 7 Replies

hello folks,i would like first of all, all the people here that took some times for answer to my questions, helped me out how this arducopter works, you are all part of my loiter succeed :)i wanted…Continue

Tags: mode, loiter

 

herve pellarin's Page

Latest Activity

JUAN JIMENEZ replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"Bernardo, Use value 14 in the RNGFND_PIN. that worked for me. "
5 hours ago
Bernardo replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"Hi :) cool that the sonar works on APM. What is the A1 pin for the Pixhawk?? I'm reading through the WiKi but there is no mention how to connect the HC-SRo4 to the Pixhawk. I use the sonar with the second board attached where 3 pins come…"
9 hours ago
Bernardo replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"Hi :) cool that the sonar works on APM. What is the A1 pin for the Pixhawk?? I'm reading through the WiKi but there is no mention how to connect the HC-SRo4 to the Pixhawk. I use the sonar with the second board attached where 3 pins come…"
9 hours ago
Bernardo replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"What is the equivalent Pin A1 (APM) for the Pixhawk? I tried to set up the sonar with the extra board (3pin) but no success so far. Where can I educate myself or find information regarding how to make work this sonar with the Pixhawk? The Wiki has…"
12 hours ago
JUAN JIMENEZ replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"HI, I purchased HC-SDR04 that has 3 pins connector and It finally worked for me last night. I have updated to firmware 3.2.1 (36b405fb).  Then  go to the configuration/tuning tab and under Full Parameter list search for…"
yesterday
Harindra W Pradhana replied to herve pellarin's discussion ultrasonic HC-SR04 suitable for arducopter?
"Well, the APM doesn't have enough time waiting for feedback from the HC-SR04, yes it's the matter of timing and interupt. To make thing works as the video, it require another brain or controller to do the triggering and waiting for echo.…"
Feb 26
herve pellarin replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"yep that s what i was sayin, i ll try maybe tomorrow see how it goes. thxx a lot for your time!"
Nov 30, 2015
Richard Kennedy replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"re- In manual mode everything is fine, when i switch to stabilize mode, no more throttle, same for rtl. Are you talking about in flight on on the bench? That is normal on the bench as if apm detects it's not moving aka on the ground as a…"
Nov 30, 2015
herve pellarin replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"oki i ll do that tomorrow. thxx a lot!"
Nov 25, 2015
Andre K. replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"I am not that familiar with the cruise mode logic , what you pointed out . that stabilize stops throttle, is best for troubleshooting as stabilize is the most basic mode that can influence throttle output  - so check THR_MIN like I suggested…"
Nov 25, 2015
herve pellarin replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"hi andré, thx a lot for your time. on another forum i got a response saying that if cruise mode is not working it s simply because the plane is not moving because i am doing static test. if i was flying, so moving, it would work. can you…"
Nov 25, 2015
Andre K. replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"the attached log contains only minimum throttle, in and out, nothing special. if you could record this:,  takeoff in manual, switch to stabilize, then manual and land. (just a short reproduction of the problem) alternatively, do it without…"
Nov 25, 2015
herve pellarin replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"hi andré, i ve cleaned all the logs, and regenerated a new one, here we go. thank you for your time best regards"
Nov 25, 2015

Developer
Grant Morphett replied to herve pellarin's discussion [HELP] No more Throttle in any assisted mode in the group ArduPlane User Group
"Can you send through a log of when this happens and we will try to have a look.  Can I also get a bit of a description of what the aircraft is?  Flying wing?  Model with under carriage? Thanks, Grant."
Nov 24, 2015
herve pellarin replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"Hi, I ve did it with mission planner. I ll post another log tomorrow. Do i get thro to eero because the plane is not moving? Thxx for your help"
Nov 24, 2015
Andre K. replied to herve pellarin's discussion [HELP]ArduPlane no more Throttle after switch to any assisted mode
"strange, my APM planner crashed on that log right after "unknown data value found: Q"   -what device is it from /how did you produce that .log ? (maybe converted a .bin) ? "
Nov 24, 2015

Profile Information

About Me:
member of airgonay s crew, fpv addict, live in french alps
Please tell us a bit about your UAV interest
living in the alps makes fpv suddenly very exciting :) low, fast, big drop, cloud hunting, i like them all :)
Hometown:
argonay

herve pellarin's Photos

Loading…
  • Add Photos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

DIY Drones Monthly
Newsletter

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2016   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service