"Apparently , auto-Trim function has to work, like you mention. but I read many comment about the manual trim gives better result than auto-trim. I never used that function, so I can not give my personal opinion. I only have experience made all…"
I am in fieldwork time, but I consulted about my mailing in my city, and one package from Australia arrived the last friday. The sender is Andre Preller. I am pretty sure that is your shipmment. I am excite to review it. I am returnt to the…"
Calle Gómez del Carpio 129. Int. 303. Barrio Medico. Surquillo.
Lima 0034. Peru.
My name: Juan Pablo Gayoso Mogrovejo
Thank you very much
I will send news when arrive ..
thank you so much....again"
I am very interested to test your prototype, at present I work with a big UAV (3.0 m wing span) mapping high lands in Andean Range Mountain. I use a Sony A7r and Sony a5100, but the Canon S100 is very useful in very high zones due to low…"
"yep, in my case the modem seen not connect with RFDTools, or 3DRRadio.exe, but I realiced that the USB port recognize the modem. So, I tried to update the firmware, as read in some part, and, miraculously, the RFDTools worked straight. After…"
"i am not an expert but I had a similar problem, the solid red means Firmware Update state. I clicked the Update button and enter in this state. The solution was update the Firmware with the same Firmware version. Please, use that as reference, I am…"
"I have a RFD900 modem Bundle working in my UAV. Now, I am build a new DIY UAV, so my question is: can I use my old RFD900 modem as ground station, and binding with new RFD900+ version in the UAV. It mean that my present Ground modem will be working…"
"Please, where can i find a detail guide in order to setup my RFD900 to V2. Actually, I have couple if RFD900 working together, but i am building a new UAV so i am thinking to use the RFD900 as ground station and V2 in air, for this units. But remain…"