marcelo
  • Male
  • buenos aires 4
  • Argentina
Share Twitter

Marcelo's Friends

  • Cala
  • ECODRONES
  • Prasant
  • robert bouwens
  • Martin Bellomo
  • arashi
  • Juampa
  • Jason Short

marcelo's Groups

marcelo's Discussions

AC 3.0.1 APM2.0 loiter overshoot

Started this discussion. Last reply by Richard Boyhan Nov 30, 2013. 1 Reply

Hello allto make it short....2.8.1 worked fine in all modes 3.0.1 works much better in stabilize!!! (a world of difference) BUT LOITER OVERSHOOT!!!what can be wrong considering EXACTLY SAME…Continue

ESC's HOT after SimonK flash

Started this discussion. Last reply by marcelo Nov 18, 2013. 1 Reply

HelloI have always used this ESC's, always very cold in temp, but now I did a simonk flash for my 4…Continue

Big Prop and motor PID TUNING

Started this discussion. Last reply by İdris AKBIYIK Sep 24. 1 Reply

HelloI' m building a 750mm arms apm2 quad with:*Rc timers 5010 and 17x5.5*Esc turnigy plush 12 from hk*4s4p panasonic 18650B inside arms (2cm alum tubes 0.5mm thick 210gr 750m2m)total weight 1.6kgcan…Continue

Compensate PIDS for too powerful motors?

Started this discussion. Last reply by marcelo Mar 25, 2013. 2 Replies

Hi Is there any hint you can give me maybe in PID tunning to compensate for too much powerfull motors for a frame,motors= NTM 2826 1200kv, prop 8x47 and fram DJI flamewheelmy friend cannot hover due…Continue

 

marcelo's Page

Latest Activity

İdris AKBIYIK replied to marcelo's discussion Big Prop and motor PID TUNING
"Hi, i have same setup for now, coud you gain pid for stable hover and flight, can you share your experiences about this setup?"
Sep 24
marcelo replied to Thomas Harvey's discussion Mission Planner not downloading map tiles for my area
"Do you have old mission planner and new version both installed on same machine?"
Dec 3, 2013

T3
Richard Boyhan replied to marcelo's discussion AC 3.0.1 APM2.0 loiter overshoot
"Check your compass. Do a compassmot and see if you are getting interference?"
Nov 30, 2013
marcelo posted a discussion

AC 3.0.1 APM2.0 loiter overshoot

Hello allto make it short....2.8.1 worked fine in all modes 3.0.1 works much better in stabilize!!! (a world of difference) BUT LOITER OVERSHOOT!!!what can be wrong considering EXACTLY SAME components location , the same apm2 quad in fact.5010-14 360kv rctimer16.5" carbon propX modeapm 2.0 AC3.0.1 mediatek 1.9 (upgraded ok)telemetry 900mhzfpvcustom frame simonk Hobby King 20A ESC 3A UBECbig battery…See More
Nov 29, 2013
marcelo replied to marcelo's discussion ESC's HOT after SimonK flash
"ok answer seems to be: In the 2012-09-30 release and in anything newer, there is a "tp_8khz.hex" build that is the same as tp.hex but runs the PWM at 8kHz. This should work fine for you if flashed instead of tp.hex. the only workaround I…"
Nov 18, 2013
marcelo posted a discussion

ESC's HOT after SimonK flash

HelloI have always used this ESC's, always very cold in temp, but now I did a simonk flash for my 4 escs ...they are getting hot after 3 mins i have to land because loss of power due to temp i think...What is the reason ? i did not calibrate them, but that should not be the reason*apm 2.0 arducopter 2.8.1*flying 30a from dealextreme.com (identical to HK-SS30A-HW …See More
Nov 18, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"then each 4p is connected like a single cell in the balance plug, resulting in a 4s4p would this be 100gr cables penality?  "
Oct 8, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"No, Im using arducopter APM2 ,so if anyone is using this control board and want to share PIDS of big motors and props, to start with, much apreciated! LAN regarding my conections remember that im puting each arm as parallel (4p). the resulting…"
Oct 8, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"Hi LAN I do not think there will be so many cables... I'm planning a parallel 4 bats in each arm, like I (marce002) posted here: http://www.rcgroups.com/forums/showthread.php?t=1880665&page=90  regarding the link for the 4in 1 is…"
Oct 7, 2013
marcelo posted a discussion

Big Prop and motor PID TUNING

HelloI' m building a 750mm arms apm2 quad with:*Rc timers 5010 and 17x5.5*Esc turnigy plush 12 from hk*4s4p panasonic 18650B inside arms (2cm alum tubes 0.5mm thick 210gr 750m2m)total weight 1.6kgcan anyone suggest good PIDS to start with to achieve a good stable hover?See More
Oct 7, 2013
marcelo replied to Para's discussion Low-KV / large prop trouble
"Please anyone tunning these big birds?? Im building an apm2 quad with: *Rc timers 5010 and 17x5.5*Esc turnigy plush 12 from hk*4s4p 18650b inside arms (2cm alum tubes 0.5mm thick 210gr 750m2m) IM WORRIED BY THE TUNNING pids to achieve steady…"
Oct 7, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"I do not understand why uneve discharge might exist, in a pack 4s4p, it is exactly the same as yours lan, but distributing t in the arms...Also this lipo is an option, expensive but very light in weight.... but 3s wont be good for my 5010-14 ....…"
Oct 5, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"and what do you think about using alum tubes 20mm diameter, 750mm lenght, put panasonic bateries x 4 into each arm? apm2.0"
Oct 4, 2013
marcelo commented on Ian's blog post My 97minute:06second record quadcopter flight
"hi Lan how did you attach the motors to the carbon rod?"
Sep 29, 2013
marcelo replied to marcelo's discussion Compensate PIDS for too powerful motors?
"Thanks Richard!!! I will try and report back.,"
Mar 25, 2013
marcelo replied to Dan Gray's discussion APM Log Visualizer Source Code
"when I click in the map, the URL being created contains "," instead of "." in the coordinates, this is due to regional settings in my computer i think, in order to avoid incorrect mapping, the url should be fixed maybe with a…"
Mar 25, 2013

Profile Information

About Me:
none to say just quads fan
Please tell us a bit about your UAV interest
quads
Hometown:
san isidro argentine

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Drone Delivery Challenge, is here

© 2014   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service