I just got my APM 2 and have everything hooked up inside my old EP-converted .30 trainer. Almost everything seems to be working as intended. Once in a while I get some servo glitches. It mostly…Continue
"Update, this might be useful to someone: I borrowed a Futaba Dual-conversion reciever (with crystal) from a friend, now the glitches are gone! It seems like the APM 2 don't like the Corona syntheizer recievers. As I said, I have tried with two…"
"I have tried changing reciever, moving the wires (output on one side of the plane and input and rx on the other) without any significant changes. In Mission planner radio calibration all the values jump like +- 2 while in neutral and some sudden…"
"No, I have a couple in other planes I could try. There has never been any problems before with the one I am using now though...
Could it be related to the ESC / BEC? I have a Hacker 55A that should have a better BEC than the Turnigy I am…"
I just got my APM 2 and have everything hooked up inside my old EP-converted .30 trainer. Almost everything seems to be working as intended. Once in a while I get some servo glitches. It mostly happens when I apply rudder or elevator rapidly. When I for example move the rudder, the elevator also moves slightly even if I am not touching that channel at all. Usually the unintended movements are tiny but once in a while it makes like 30% throws. It seems to be worst in manual mode.I am using a…See More