"Hello,
now i have the same problem. After i disconnect an USB Serial Converter from Telemetry Port something smoke on the APM2. After that, Windows doesn´t recognize the APM anymore. I reflash the atmega32u2 with no succes. Then i replace the…"
rallymr2's Discussions
RSSI voltage parameter
Started Feb 14 0 Replies 0 Likes
Would it be possible to add in a voltage range for the RSSI on the RC reciever. My receiver puts out about 1v up to 3.2v.With the current default of 0 to 5v it reads from 30% to 60%. I know there are…Continue
More USB issues
Started this discussion. Last reply by Jake Stew Jul 16, 2012. 4 Replies 0 Likes
I got my replacement APM2 last week. Thanks for getting it to me so quickly by the way. Anyway I got everything up and running. I did some test flights in the living room and everything was going…Continue
3DR Hexacopter and APM2 for sale
Started this discussion. Last reply by Cyrillou Jul 16, 2012. 5 Replies 0 Likes
If anyone wants a slightly used APM2 with no USB loaded with Arducopter 2.6 along with the 3DR radios and OSD I'll sell it all for $200. Still communicates fine with 3DR radios. May even sell the 3DR…Continue
Possible compass issue?
Started this discussion. Last reply by rallymr2 Jul 3, 2012. 3 Replies 0 Likes
I am running the 3DR Hexa with APM2 and Arducopter 2.6.I just started flying it this last weekend and noticed that sometimes all of the sudden the controls go reversed. I am flying in stability mode…Continue
rallymr2's Page
Latest Activity
rallymr2 commented on John C.'s blog post 25% Discount at Our New Store"I really wanted to use my gift certificate too. I guess it's tied to the other site though for now."
rallymr2 commented on John C.'s blog post 25% Discount at Our New Store"No discount for me either. I'll keep trying."
rallymr2 posted a discussionRSSI voltage parameter
Would it be possible to add in a voltage range for the RSSI on the RC reciever. My receiver puts out about 1v up to 3.2v.With the current default of 0 to 5v it reads from 30% to 60%. I know there are a few different receivers out there with different ranges of output voltage. Would be nice to have it read correctly so I don't have to calculate it in my head while flying.Thanks,JeremySee More
rallymr2 replied to Randy's discussion ArduCopter 2.9 / 2.9.1 released"I noticed something strange with the sonar enabled. I'll try and get a log of it. Basically it holds altitude great and then does a sudden dip like there was a quick power outage. It then recovers and bobs up and down for a couple seconds to…"
rallymr2 replied to Gary McCray's discussion Vibration Isolation and Dampening of APM / PX4 for version 2.9"I knew it. As soon as I posted it I found it.
For anyone else looking all you have to do is go to command line. Type "logs" then "enable RAW"
Thanks"
rallymr2 replied to Gary McCray's discussion Vibration Isolation and Dampening of APM / PX4 for version 2.9"I've done some searching but can't seem to find the way to get this data in a log file. The only thing i can seem to find is people referring to enabling "raw" mode in CLI. I can't seem to find anything that describes how to…"
Alain Sutter replied to rallymr2's discussion USB not recognized at all"Hi, I have the same problem: the apm 2.5 is not recognized anymore on my computer (win7) and on others too.
The apm is not dead. I wanted to upload a new sketch (It did work in the past).
I have the 3DRadios. Is there a chance that i can do the…"
Cyrillou replied to rallymr2's discussion 3DR Hexacopter and APM2 for sale"Hi,
What you mean :"Everything works but the USB communication on the APM2."
Do you mean USB doesn't work?
Best Regards,
Cyrillou"
Jake Stew replied to rallymr2's discussion More USB issues"I remember a bootloader post and instructions not too long ago. A search can probably find it.
"
rallymr2 replied to rallymr2's discussion More USB issues"Thanks for the quick responses.
Yes Chris it was 3DR support. I'll try and send them another email.
Jake I did remove and reinstall the driver. I also tried other machines and no luck. I wondered if somewhere some code got stuck and when I…"
Jake Stew replied to rallymr2's discussion More USB issues"Most likely you have a wrong driver loaded. You need to remove this first. I'd suggest that if you're at this point you probably need a fresh install of windows anyways.
You also probably overwrote the bootloader, so search…"
3D RoboticsChris Anderson replied to rallymr2's discussion More USB issues
"Was that 3DR support? If so, please email them again and let me know if you don't get a response in 48 hours. "
rallymr2 posted a discussionMore USB issues
I got my replacement APM2 last week. Thanks for getting it to me so quickly by the way. Anyway I got everything up and running. I did some test flights in the living room and everything was going great. I started to tune the PID's and it was hovering nice and steady.I swapped out batteries and plugged it in. I noticed that my remote was not working any more. I had signal and the light on the receiver was on. I plugged it into the USB and kind of like before it would not be recognized by…See More
rallymr2 replied to rallymr2's discussion 3DR Hexacopter and APM2 for sale"Everything works but the USB communication on the APM2."
rallymr2 replied to rallymr2's discussion 3DR Hexacopter and APM2 for sale"This would be coming from Colorado."
Profile Information
- Tell us a bit about your UAV interest
- FPV with Hexacopter
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Spanish Photogrametry gr…
43 members
-
Moderators
24 members
-
Taiwan ROC ArduPilot Gro…
8 members
-
Documentation Editors
51 members
-
ArduRover User Group
184 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
