"I have the same problem, any news?"

"Hi, it is for precision farming stuff....ndvi maps, water stress & co but the difficult part is to have a stable flight....and trustable... today RTL and aotulanding trial -> 3 broken propelers, one arm damaged... I'm updating the…"

"Hi Olivier, Torino....sei italiano?? direi forse francese...Anyway, I guess you could need to change also the propellers...you will need more thrust, i will suggest you to use more powerful engines with at least 12x4.5 props. I have en hexa with…"

"Hi Rick, i will try again, hopefully this evening. I have teamviewer installed, so no problem for this.In case I will face the same problem it could be a solution, thanks for your availability. In case I'm not able to make the air module work…"

"If you keep having issues with it, if you install Team Viewer, I can give you a hand.  Cheers, Rick"

"Hi Mike, yes I've done it...if not no way ;-) But it may be I've loaded the wrong firmware...? I've read the firmware of the 'ground' module and written it to the air one... is sending the AT commands and looks working.. I…"

"Just reading through your problem, I couldn't spot the obvious so I am going to ask. Have you unplugged the "Air" module from it's board on the Hexa and plugged it into the USB board connected to your computer to configure it…"

"Hi Rick, I've tried your procedure in order to unbrick the air module, but no success. I can read the configuration of the 'ground' one but looks like I cannot write it in the air one, or better I can write it, then I have to switch…"

"Hi Rick, thanks to your reply. I will do all the tests tomorrow (and some repair work as well.....). I will follow the procedure...Hope the xbee module could work again! Thanks again for your time! Let you know Marco"

"I just did this 2 minutes ago so I thought I would write this while the process is somewhat fresh. The un-bricking process is pretty simple, but it only works if you have 1 working xbee. 1.  Open X-CTU. 2. Load the config from the working xbee…"

"@Mike: the red light in the Air module (hexa) is always on as I connect the batteries... @Rick: the Air module does not have the usb connector....i guess i will need a special cable in order to use the tool X-CTU.... In what does consist the…"

"So you have 2 modules.  Lets call them the Air, which is on the Hexa, and the ground module.  On the ground module do you have a green light when you power them both up?  If not they wont communicate, at least not in my…"

"I believe the red LED is an RSSI indicator. It comes on whenever I open a connection to the copter. So in Mission Planner, when connect is selected, the Red LED comes on."

"Hi Guys, I have the same problem and I don't know how to solve it. The description of David copies my problem...How did you solve it? Thanks Marco"

"Hi Mike, in fact I have a Window7 64bit...I will try your suggestion, hope it could work. One question: in the xbee module on the hexa, both blue and red light are on, I remeber the blue one but not the red one? do you know what the red led…"

"to me it looks like your xbee's ant talking to each other. ie no data"