"Hi ZacCom, did you ever sort this out ? "
ZacCom's Discussions
Minim Osd Blackscreen
Started this discussion. Last reply by dudz May 7, 2012. 1 Reply 0 Likes
I just received my MinimOsd and I have a pal camera. I soldered all the pins and jumper pads to have the APM 5v provide power to the whole board and the camera and transmitter with their own power…Continue
MinimOSD Issues
Started Feb 3, 2012 0 Replies 0 Likes
I just received my MinimOsd and I have a pal camera. I soldered all the pins and jumper pads to have the APM 5v provide power to the whole board and the camera and transmitter with their own power…Continue
ZacCom's Page
Latest Activity
ZacCom replied to Alan's discussion "No Heartbeat Packets Received" on Mission Planner"You just need to download the old version from this link and extract it on your desktop. However, if you click upgrade it will replace the files in that folder only. You can different versions of the software. However if you upgrade the program the…"
ZacCom replied to Alan's discussion "No Heartbeat Packets Received" on Mission Planner"Have you downgraded the mission planner 1.1.50 and tried it again."
ZacCom replied to Alan's discussion "No Heartbeat Packets Received" on Mission Planner"2.28 I used Mission Planner and then uploaded firmware arduino relax. I have xbee but havnt connected due to this issue. Also, notice it killed my gyro when I try to get live data. Connecting USB at this time."
ZacCom replied to Alan's discussion "No Heartbeat Packets Received" on Mission Planner"I have the same problem with this update. I think something broke it was working perfectly until latest Mission Planner update. Hopefully there is a update for it today :)."
ZacCom replied to Andrew Boos's discussion iPhone controlled UAV"As long as you use mavlink mesages for command control it should work. Also, you can create your app as Mac objective c. The arduino helps with the uart messages with processing data. If you can get the iPhone device to act like a arduino it will…"
ZacCom replied to Andrew Boos's discussion iPhone controlled UAV"Re you using FTDI cable to iPhone only? If you can get that work then you might be able port mission planner mavlink."
ZacCom replied to Andrew Boos's discussion iPhone controlled UAV"Right now I am using apple camera USB port and FireWire cable to arduino UNO to xbee 900 pro. I might do a pcb board or find a good off the shelf. So far no jailbreak has been used but I think I might have to later on waypoints and returning…"
ZacCom replied to Andrew Boos's discussion iPhone controlled UAV"Good news I developing a app for iOS so we can use the regualar xbee shield and xbee to send receive data with each other. I am working with google earth to make it possible to set waypoints with the apm. Once I receive it in the mail. (First batch…"
ZacCom replied to yoface55's discussion bixler runaway loss"Thanks for this post I going to remove my magnets and see if there is a difference. I don't feel like losing 500 dolllar plane."
ZacCom replied to Simon's discussion APM 2 Status?"I sen email last week an havnt got a response me order number was 18524 and if your 18527 I should be getting mine soon to. However, nothing from sales at this time myself."
ZacCom posted a discussionMinim Osd Blackscreen
I just received my MinimOsd and I have a pal camera. I soldered all the pins and jumper pads to have the APM 5v provide power to the whole board and the camera and transmitter with their own power and ground. When I have the 5v only plugged in the whole board lighted up but the chip on the APM side gets pretty hot.(is this normal) I also soldered the pal pad on the board. All soldered points are clean and perfect not sloppy. The video feed just shows a black screen and no data is showing on the…See More
ZacCom replied to Ellison Chan's discussion DiyDrones Rants and Raves"Camera and transmitter are on a separate 12v battery and not connected to the miniosd at all just the video feed input and output. 5v from apm is powering board only but the left diamond angle chip gets hot. Rest of the board is fine. Sorry for the…"
ZacCom replied to Ellison Chan's discussion DiyDrones Rants and Raves"But even without a data stream why is it not showing a video signal. This would be bad for in flight. Lose the data stream then would lose video signal equal lost plane. Does your chip on the apm side get real hot?"
ZacCom replied to Ellison Chan's discussion DiyDrones Rants and Raves"I just received my MinimOsd and I have a pal camera. I soldered all the pins and jumper pads to have the AVR 5v provide power to the whole board and the camera and transmitter with their own power and ground. When I have the 5v only plugged in the…"
Profile Information
- About Me:
- Military
- Tell us a bit about your UAV interest
- Everything
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Nitro-powered Arduplane …
15 members
-
ArduPlane User Group
721 members
-
Andropilot Users Group
203 members
-
ArduCopter User Group
1356 members
-
DIYDrones News Team
5 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
