"I get the same problem when going into terminal mode, the terminal screen just shows garbage, Tried pressing enter 3 times as suggested in the comments and the "mission planner" just hangs app. I am using the XBEE XBP24 Modem Type, Would…"
-
zdebeer
- Male
- Johannesburg
- South Africa
- Blog Posts
- Discussions (8)
- Groups
- Photos (3)
- Photo Albums
- Videos (1)
zdebeer's Discussions
DJI Innovation F550 Measurements
Started this discussion. Last reply by zdebeer Jun 18, 2012. 6 Replies 0 Likes
I am planning to buy a DJI F550 frame for my ardupilot, my home made frame is not as perfect and strong as I would like it to be and figured it will be easier just to buy a proper frame. I was hoping…Continue
zdebeer's Page
Latest Activity
zdebeer replied to zdebeer's discussion DJI Innovation F550 Measurements"On my F550 APM1 I have the GPS mounted on the bottom plate and it seems to work fine, but the magnometer is picking up allot of interference. I planning to move the magnometer to the top to see if its better there."
Will Kruger replied to zdebeer's discussion DJI Innovation F550 Measurements"Along the same lines...if you mount a APM 2 board inbetween the plates do you need to run the GPS externally or will it acquire a signal from inside?"
zdebeer replied to Alvin Stewart's discussion Random Flip On Takeoff"Version 2.5.5 APM 1, maybe I should reload it and see if there is an improvement."
zdebeer replied to Alvin Stewart's discussion Random Flip On Takeoff"Not Sure if my problem is related, but I found that sometimes my copter flip on take off, I have learned to spot it by now before it happens, in my case a reboot fixes the issues. I Found that when this happens and I look at the log files the Y Gyro…"
zdebeer posted a videoQuadcopter Test Flight
This is a Test Flight of my home build quadcopter with Ardopilot. 1000kv Aeolian motors, 30A ESC, 5200mA 2cell. Total Weight 1.3Kg
zdebeer replied to zdebeer's discussion DJI Innovation F550 Measurements"Do you need to unscrew, to access the usb port for setting changes?"
adam schrier replied to zdebeer's discussion DJI Innovation F550 Measurements"I have an f550 with apm1 installed between the plates. there is plenty of room. the only drawback is the 24 screws you have to remove any time you want to get to it which can be a pain. "
zdebeer replied to zdebeer's discussion DJI Innovation F550 Measurements"Thanks, this will help me allot."
GearType replied to zdebeer's discussion DJI Innovation F550 Measurements"I have an F450 and it's about 1.5 inches between platforms. 2.1 inches between legs on the sides. It's tall enough to house the APM2 stacked on a 9x receiver if your connectors go to the side or you feed the receiver connections through…"
zdebeer posted a discussionDJI F550 Measurments
I am planning to buy a DJI F550 frame for my ardupilot, my home made frame is not as perfect and strong as I would like it to be and figured it will be easier just to buy a proper frame. I was hoping if someone that already have a F550 can tell me how large the space between the top plate and the bottom plate is (Height x Width x Length), I was wondering if I can mount the APM1 board between the two plates instead of on top of the frame. See More
zdebeer replied to Mark Zimmerman's discussion ArduCopter cannot fly anyway"Sounds to me you connected the motors wrong to the APM. I had similar problem, did not realize that the APM has a front side and it should be inline with your quadcopters front, I connected the left side motors on the right side. So…"
Profile Information
- About Me:
- a software developer interested in rc flying, robots and drones.
- Tell us a bit about your UAV interest
- quadrocopter in testing.
zdebeer's Photos
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Moderators
24 members
-
Andropilot Users Group
203 members
-
ArduCopter User Group
1355 members
-
ArduRover User Group
207 members
-
Japan ArduCopter Group
58 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
