September 2015 Blog Posts (95)

Experiments in Autonomy

Sometimes a flight experiment gone awry exposes a set of behaviors that directly correlate to previous design choices. It's a moment of validation based on developing systems with the expectation that they will fail. The video below is an example of one of these moments.

During one my daily…

Continue

Added by earthpatrol on September 30, 2015 at 11:30pm — No Comments

Our new Pixhawk based KickStarter project

Easy Drone XL Pro is on KickStarter



Hi, just wanted to let you know that we are back on KickStarter to fund our newest and largest drone - the XL Pro! Please check out our campaign and pledge a dollar if you like what we are doing.

Also, we are counting on you to share and spread the word!

Yours truly, …

Continue

Added by Ivan Stamatovski on September 30, 2015 at 4:00pm — 9 Comments

Users feedback report around GCS software investigation

Users feedback report…

Continue

Added by Beatriz Palmeiro on September 30, 2015 at 10:30am — 11 Comments


3D Robotics
Startup focusing on swarming drones with APM/Pixhawk

Queen Bee Photo: Sarah Gerber Left to right: Queen B Robotics’ Akshay Jain, Chris Blower and Sahil Juneja at their WeWork office in downtown Berkeley. Photo: Sarah Gerber

From …

Continue

Added by Chris Anderson on September 29, 2015 at 9:46pm — 3 Comments

How to avoid pitfalls when using taper and twist

Hey guys,

Just put together a quick video to show the effects of taper ratio and twist and how they interact. Turns out using rules of thumb in this area can be detrimental. I have used similar rules of thumb in the past, but thought it was high time to walk through some rigorous calculations to see what's best.

Hope it's…

Continue

Added by Doug Hunsaker on September 29, 2015 at 8:30pm — 7 Comments


3D Robotics
3DR launches teaser for short film series "Life After Gravity"

Hey DIY Drones community,

I just wanted to share this video with you. It's a teaser for the new upcoming original sci-fi series "Life After Gravity" which was shot entirely with 3DR's Solo and GoPro to showcase their filmmaking capabilities.

Life After Gravity will debut next week on our YouTube channel and the next 6 episodes will be…

Continue

Added by Daniel Iglesias on September 29, 2015 at 10:34am — 10 Comments


Developer
Copter-3.3 ready for wider use

After months of testing by the beta-testing team, Copter-3.3 is ready for wider use.  Similar to the Copter-3.2 release this is a "soft launch" meaning that for the next couple of weeks, we are asking users to load the new version using the Mission Planner's "Beta firmwares" link…

Continue

Added by Randy on September 28, 2015 at 7:18pm — 82 Comments

Free Android App for UAV's

New app available for UAV pilots.

This app contains over 46,000 airports around the world which can be displayed quickly and easily when flying RC models. When flying RC/UAV's commercially, these areas are considered "No Fly Zones" based on your geographic…

Continue

Added by Paul on September 28, 2015 at 6:14pm — 8 Comments


3D Robotics
New Communications Specialist in 3DR Tijuana

Hello DIY Drones Community! I am Daniel Iglesias, 3DR's the new Communications Specialist down at the Tijuana plant (where a lot of the magic happens). I am thrilled to join this awesome team of brilliant minds that work together to bring you the finest products.

Here in Tijuana we assemble a lot of pieces used in our products like the Pixhawk, PMs, etc. as well as UAVs like the Iris and Areo. We also run tests like the Pixhawk jig test to ensure the top quality of…

Continue

Added by Daniel Iglesias on September 28, 2015 at 1:30pm — No Comments

Micro Drone of the Future

I've been looking at micro drones lately and I'm now sure it is likely that the future of the drone is the tiny drone much like this mechanical dragonfly.

With the use of very tiny piezoelectric actuators that draw very little current I believe it is now possible to create these very tiny flying…

Continue

Added by Monroe King on September 28, 2015 at 1:07pm — 21 Comments

Airfoil Analysis

  Which airfoil shape is the best?

My name is Patrick Hanley and I am new to DIY drone.  My background is in aerodynamics.  I received my SM & Ph.D. degrees from MIT.  I worked as a professor at U of Connecticut teaching…

Continue

Added by Patrick Hanley on September 28, 2015 at 8:30am — 17 Comments

PaparazziUAV and Multiple MAVs in Flight

A few weeks back I posted about flying multiple robots along with my Periscope channel where the videos age out on a daily basis. Some folks requested a more persistent video of these flights. Yesterday, I went out to the field and did a few flights. My friend Max was nice enough to film one…

Continue

Added by earthpatrol on September 27, 2015 at 1:30pm — 2 Comments

The MK.2 Explorer4, Result of an open source frame.

Hey Folks,

I would like to show you the Explorer4 MK.2.…

Continue

Added by luke cooke on September 27, 2015 at 11:55am — 5 Comments


Moderator
The first drone helicopter entirely made in Italy: Frame Protos 500 + VR uBrain and GPS.

Goodmorning everyone,

I am happy to present the first Drone helicopter completely Made in Italy :)

  • Frame Protos 500  Helicopter by MSheli (made in italy) 
  • Flight Control: VR uBrain 5 by Virtualrobotix (made in italy) 
  • GPS: GPS VR 8 by Virtualrobotix (made in…
Continue

Added by Roberto Navoni on September 27, 2015 at 7:30am — 6 Comments


MR60
AirbotPower board

Figure1 : AirbotPower board recto

Figure2 : AirbotPower board…

Continue

Added by Hugues on September 27, 2015 at 3:21am — 17 Comments


Moderator
VR Brain 5 LX : The first flight of virtualrobotix Linux flight control with APM 3.3RC12 :)

This is the first Flight of VR Brain 5 LX

These are the picture of first drone controlled by VR Brain 5 LX …

Continue

Added by Roberto Navoni on September 25, 2015 at 2:30pm — 4 Comments

VertiKUL 2: our second generation of transitioning VTOL UAV for automated aerial transport

At the University of Leuven (KU Leuven) we are working hard on improving performance of multi-rotor UAVs in terms of flight speed, endurance and possible payload, with the application of…

Continue

Added by Bart Theys on September 25, 2015 at 8:30am — 9 Comments

Why sweep hurts endurance and what to do about it

Hey guys,

I just wrapped up a project that taught me a lot about the effects of sweep on flying wings. Turns out sweep can significantly increase drag and hurt endurance. Sweep isn't all bad, though. There are ways to make a flying wing stable if you do it right.

I put together this film to explain the physics of what's going on and how to get stability without sacrificing endurance.

Hope it's helpful.…

Continue

Added by Doug Hunsaker on September 24, 2015 at 2:00pm — 19 Comments


Developer
APM:Plane 3.4.0 released

The ArduPilot development team is proud to announce the release of version 3.4.0 of APM:Plane. This is a major release with a lot of changes so please read the notes carefully!



First release with EKF by default



This is the also the first release that enables the…

Continue

Added by Andrew Tridgell on September 23, 2015 at 5:35pm — 77 Comments

Nica Drones Mag Lifter EPM 688 Next Steps.. We made IRIS do it

I had posted the following blog for developing possibly  real application. My partner Ian, he is a bit of a jock and does not want to give up. Anyway, using Spektrum DX8, he was able to hook up the Mag lifter to "Pick Up and Deliver Cargo". You can see the video on our website.

There are couple of…

Continue

Added by Harjit Sethi on September 23, 2015 at 4:00pm — 11 Comments

Monthly Archives

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

1999

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service