I wanted to share with you our video on updating the firmware on your 9x radio. This is a follow up to our "9x DIY Upgrade Kit" install video. It covers everything you need to successfully update the firmware on your 9x radio following the hardware install covered in first video. In addition, this video also shows you how to install sample models and calibrate your…

Hello. This is a follow up to our "9x DIY Upgrade Kit" install video. It covers everything you need to successfully update the firmware on your 9x radio following the hardware install covered in first video. In addition, this video also shows you how to install sample models and calibrate your radio.



The video is divided into sections…

We've posted an instructional video for installing our 9x DIY Upgrade Kit in either a FlySky TH9x or Turnigy 9x…

After coming back from my honeymoon I finally found some time to get some real flights. 3 weeks ago I flew my copter for the first time but it was just a few minutes on a very low altitude in front of my block. Today I went to some open space. Unfortunately, the wind was very strong so learning changed into fighting with the wind. Still managed not to crash the…

--UPDATE-- We've gotten a great response from the DIY Drones community, THANKS! Due to this, we've decided to do a special 1-week promotion... the TH9x is on sale for $69.95 from now through 7/20!!  Anyone who ordered a radio recently from our site will receive a rebate or credit on a future purchase. Thanks again! --…

Details:

radio: FlySky 9x flashed with Er9x

brain: APM2

esc: HobbyKing 30A

motors: EMP SERIES Outrunner Brushless Motor C2830 KV750

battery: Turnigy Nano-Tech 4Ah

frame: HobbyKing Q450

Surprises/issues.

I had to reverse pitch in my radio as default settings caused copter flying backward with stick pushing…