Jean-Louis Naudin's Blog – February 2011 Archive (4)
Quadcopter flight with the FCWii board and the Wii Motion Plus and Nunchuk MEMS sensors.
Here a video of a test flight of my Quad Rotor Observer (QRO) v8 with the FCWii board and the Wii Motion Plus (gyroscopes) + Nunchuk (accelerometers) MEMS sensors.
There was a strong wind during the tests flights (30 Km/h NW, gusting 40 Km/h, rainy...)
The tests flights have been successful, the model was very stable in spite of the bad weather conditions.
Normal flight mode and…
Added by Jean-Louis Naudin on February 26, 2011 at 11:20pm — 9 Comments
Fun Quadcopter flights with a Wii Motion Plus and a KKmulticontroller type board
Here a video of the maiden flight of my Quad Rotor Observer (QRO) v7 with a Wii Motion Plus and a "home made" KKmulticontroller type board.
Flight controller hardware:
- Home made KKmulticontroller board with an ATMEGA168 and based on the board of Rolf R Bakke
- Wii Motion Plus (genuine Nitendo version) with the IDG-600 and the XR3500 MEMS sensors
Flight controller firmware:
- XXcontroller_KR_v1_5b based on assembly code by…
Added by Jean-Louis Naudin on February 21, 2011 at 12:08am — 5 Comments
Position Hold flights at High Altitude with the OptiFlow Tricopter (OFT)
Position Hold flights at High Altitude with the OptiFlow Tricopter (OFT) v1
Successful high altitude (>100m AGL) position hold tests flights with an optical flow sensor on a Tricopter (OFT) UAV.
Tests flights:
1) Fast climb rate to about 100 m AGL in hold position mode with only the throttle command.
2) At 100 m AGL, a 360° turn has been done (wind 14 km/h from SE) with only the yaw command.
3) Fast descend…
Added by Jean-Louis Naudin on February 17, 2011 at 6:18am — 20 Comments
Quadcopter QRO v5 simulation for AeroFly Professional Deluxe
Quadcopter simulation on AeroFly Professional Deluxe
Here, you will find the model of my Quad Rotor Observer (QRO) v5 for the AeroFly Professional Deluxe simulator
(AFPD).
This is very useful for training…
Added by Jean-Louis Naudin on February 4, 2011 at 11:27pm — 16 Comments
Latest Blog Posts
- Autonomous flight mission with the ArduPlaneNG v2.x R5 and AIOP IMU board on Maxi Swift flying wing
- Full autonomous flight with ArduPlaneNG v2.x with an All In One Pro (AIOP) full IMU board
- ArduCopterNG v2.7 tested on All In One Pro (AIOP) with a F450 Quadcopter
- APMRover 2, a fun UGV project for full autonomous recon missions...
- Full autonomous Cross Country Soaring flights with the ThermoPilot v6.x
- Full AUTO-AUTO LANDING with the ArduCopter v2.4xp with a Quadcopter and an Helicopter.
- Full autonomous slope soaring with the ThermoPilot v5.2
Most Popular Blog Posts
- APMRover 2, a fun UGV project for full autonomous recon missions...
- Autonomous flight mission with the ArduPlaneNG v2.x R5 and AIOP IMU board on Maxi Swift flying wing
- Quadcopter QRO v5 simulation for AeroFly Professional Deluxe
- Coanda Effect Saucer (CES) UAV with an ArduIMU+ V2
- Flight of the SCORPID-450 OAT/VTOL bicopter FULL IMU stabilized from Matthieu Bourdarias
- ArduCopterNG v2.7 tested on All In One Pro (AIOP) with a F450 Quadcopter
- The Quad Rotor Observer flight by Jean-Louis Naudin
Blog Topics by Tags
- UAS (34)
- DRONE (34)
- UAV (32)
- multicopter (21)
- quadcopter (17)
- ardupilot (15)
- autopilot (14)
- VTOL (12)
- multirotor (12)
- ardumega (11)
- arducopter (7)
- glider (4)
- kkmulticopter (4)
- quadrotor (4)
- MAJA (4)
- ARDUPILOT (3)
- ArduIMU (3)
- Ardupilot (3)
- GoPro (3)
- Gopro (3)
- Wii (2)
- ardupirates (2)
- arduplane (2)
- Ardumega (2)
- GLIDER (2)
- rc (2)
- soaring (2)
- SOARING (2)
- UGV (1)
- aerosimrc (1)
- AIOP (1)
- ardupirate (1)
- ARDUMEGA (1)
- AUTOPILOT (1)
- Aerofly (1)
- drone (1)
- Aeroflypro (1)
- flow (1)
- ArduPilot (1)
- gopro (1)
- Arducopter (1)
- Autopilot (1)
- mutirotor (1)
- Bicopter (1)
- optical (1)
- FCWii (1)
- tricopter (1)
- Multicopter (1)
- Quadcopter (1)
- THERMAL (1)
- Tricopter (1)
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
182 members
-
Documentation Editors
51 members
-
Spanish arducopter Users
83 members
-
Moderators
24 members
-
ArduPlane User Group
682 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
