3D Robotics

Jordi Muñoz's Blog – November 2009 Archive (6)

Search Blog Posts

How to remove the High Pass Filter from your ArduIMU and Razor boards.

Some details you must remember:



-Your solder skills must be advance or medium-advance to attempt this.

-If you try to do it with your razor remember that you will void your warranty with SparkFun.

-The same with ArduIMU, if you can't do it i will for you (free of charge).

-Not all the ArduIMU's flats have high pass filters, please double check. Check if the HP resistors are already gone.



To remove the capacitors and the resistors is pretty easy. First try to… Continue

Added by Jordi Muñoz on November 25, 2009 at 4:30pm — 14 Comments

More news.. (Including new 2Ch OptoCoupler and ArduIMU Flat issue)

For some reason my left index finger hurts me, so i can't type very well. ;-)



I'm setting up ArduIMU and ArduPilot SVN repertory, in conjunction with Google code. In that way you will be able to track all the changes made to the code and spot the differences between revisions with the possibility to comment (or complain) about it.



Lets do an interesting example, if you go to google code repertory for ardupilot and you click in the tab "source" and then in the option… Continue

Added by Jordi Muñoz on November 15, 2009 at 2:30pm — 10 Comments

ArduIMU+ V2 (Flat) now available for preorder..



The new and flat version is now available for pre-order for just $129, the estimated shipping date should be Tuesday and you can get it here. I also have big… Continue

Added by Jordi Muñoz on November 8, 2009 at 6:00pm — 36 Comments

Can somebody tell me the meaning of this picture?


The first two in guess it correctly, will receive a unit free of charge including UPS shipping. Limited to one international.

Added by Jordi Muñoz on November 7, 2009 at 11:30pm — 32 Comments

The Best Stabilizer!

LOL, i was wondering the refresh rate of that… Continue

Added by Jordi Muñoz on November 4, 2009 at 9:00pm — 19 Comments

ArduIMU V13 Officially Released!







Hi there, finally is here and includes many improvements thanks to Doug Weibel. Try it out! here.

-Coordinate system has been corrected.

-The gyros are now in order X,Y and Z.

-Extra LED status,… Continue

Added by Jordi Muñoz on November 4, 2009 at 3:00pm — 19 Comments

Latest Blog Posts

Most Popular Blog Posts

Blog Topics by Tags

Monthly Archives

2012

2011

2010

2009

2008

Social Networking

Top Content 

1 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
2 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
3 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 How to succeed without really trying

How to succeed without really trying

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service