The most basic autopilot you can buy is the UNAV PicoPilot N
, which is basically just a one-axis gyro and a GPS, with an old Pic processor inbetween. It's a "turn-rate leveler", which is to say that it… Continue
Added by Chris Anderson on August 30, 2009 at 10:00pm —
A number of you had sensor calibration questions, so I asked Jordi, to get the answers straight from the source:
1) Are the sensors calibrated only when the bind plug is on or also with every reset?
Only when you insert the bind plug, then it will be recorded in the eeprom. If you restart you don't have to calibrate again (in short periods of 15 mins, battery change for example).
2) Does the sensor calibration happen after GPS lock or… Continue
Added by Chris Anderson on August 27, 2009 at 9:30am —
For those of you who signed up for the Sept 2 UAV field trip to NASA Ames
and submitted your name before my comment marking the 12th person, here are the details.
1) You… Continue
Added by Chris Anderson on August 25, 2009 at 10:00am —
Here are the latest standings (just top 10) for the T3 contest
. Our judge, Gary Mortimer, has added flags to inspire national rivalries and inter-Nordic competition. Paparazzi and… Continue
Added by Chris Anderson on August 24, 2009 at 9:05am —
, the manager of the NASA Autonomous Systems and Robotics
department, has kindly offered to give a dozen lucky DIY Drones members a tour of the… Continue
Added by Chris Anderson on August 19, 2009 at 8:00pm —
Some of you have noticed that we've added a chat app
to this site. The problem is that we're all busy and scattered around the world's time zones, so it's hard to get a critical mass of people in the chat room at any one time. So I suggest a scheduled chat hour, once a week.
When? The poll is below, but I'll make my own preference clear first. I'm in California, and the only predictable free time I've got is on Sunday evenings.… Continue
Added by Chris Anderson on August 18, 2009 at 8:00pm —
Probably useless today, but what a cool bit of autopilot nostalgia! A mechanical gyro from a missile for $16.95. From the product listing
: "These are precision rate gyros that… Continue
Added by Chris Anderson on August 18, 2009 at 4:00pm —
With just two weekend still to go in the T3 Contest
, here are the latest standings. Paparazzi is in the lead, but we have practically every other… Continue
Added by Chris Anderson on August 18, 2009 at 8:11am —
I've got twin EasyStars, one with AttoPilot and one with ArduPilot. I had them both out today to begin the process of benchmarking the two autopilots against each other. Two interesting things happened, one scary, the other exhilerating:
It's quite windy at our field these days and I've been having trouble with the the current ArduPilot navigation algorithms, so I set out to try various PID settings. I put the EZ in autonomous mode and just started watching it hunt for… Continue
Added by Chris Anderson on August 16, 2009 at 8:57pm —
Congrats to Pablo Ruiz
of Spain, who is our 5,000th member!
In the two years that this site has been running, it has grown to nearly 5,000 visitors a day and… Continue
Added by Chris Anderson on August 15, 2009 at 8:30pm —
Demonstrating the VTOL takeoff and landing of the autopilot. More at this… Continue
Added by Chris Anderson on August 15, 2009 at 12:09pm —
Jordi has added a whole bunch of new products to the DIY Drones store
. Here are just a few, with product descriptions:…
Added by Chris Anderson on August 15, 2009 at 12:13am —
If you want to create a full hardware-in-the-loop simulator, where a flight simulator program on your PC simulates the ArduPilot sensors and GPS while ArduPilot flies the plane in the simulator, you've got to have a pretty sophisticated bit of gear between ArduPilot and… Continue
Added by Chris Anderson on August 13, 2009 at 11:00pm —
This is a little out of the hobbyist league, but at the AUVSI convention, Procerus showed off its new gear, including the awesome Kestrel 3 autopilot. Check out the features above!…
Added by Chris Anderson on August 13, 2009 at 5:24pm —
Arduino 17 is now out
. The main changes are an improved IDE (the serial monitor is now a separate window) and better commenting, and some upgraded libraries including the LCB and the servo lib.
Added by Chris Anderson on August 11, 2009 at 10:58pm —
Added by Chris Anderson on August 10, 2009 at 7:30am —
Added by Chris Anderson on August 9, 2009 at 10:36pm —
One of the best ways to test your sensors, servos and navigation routines is by walking around carrying the plane. But that can be cumbersome, and there's always the risk that you'll forget to unplug a wire and end up getting whacked by a spinning prop. Also, who… Continue
Added by Chris Anderson on August 8, 2009 at 10:00pm —
To keep a bit of order here, I need to emphasize the difference between blog posts and the forums. ALL tech support issues and questions should go in the Forum. Blog posts are ONLY for information of interest to the broader DIY Drones community, such as:
-News about UAV, sensors, airframes, R/C electronics, etc.
-Successful UAV setups and flights.
-Notification of new updates for any UAV hardware/software.
Everything related to support, introductions, Ardupilot… Continue
Added by Chris Anderson on August 8, 2009 at 9:15pm —
I was test flying today in anticipation of a trial for the T3 Contest entry tomorrow. The winds were pretty high, around 20-25 Mph, and the airplane was unable to make headway against them. So I reverted the throttle to manual control (plugged ESC straight into the RC) and made sure that the throttle was always high enough to make good headway. Night and day! The plane navigated great and did figure eights overhead for 15 minutes before I put it back into manual and landed it.
Added by Chris Anderson on August 8, 2009 at 6:30pm —