New IMU from Sparkfun; soon to be an AHRS with DIY Drones

Sparkfun has just released an "9DoF" Razor IMU board ($125) with an Atmega328, three flat gyros, a three-axis accelerometer and a three-axis magnetometer (no GPS input). This is basically similar to the ArduIMU+, but designed for indoor use or other places where GPS is not available or desirable. Because the Atmega runs at 16 Mhz, it's Arduino compatible.

We've been working with them on this board, and will be converting the ArduIMU+ code to work with it soon; it will be available on the Sparkfun site and here. Stay tuned!

Views: 828

Comment by kostalexis on January 7, 2010 at 9:01am
guys when will be the code ready and published? Are you going to implement a EKF or remain to the DCM algorithm?
Comment by Andrew Whipple on February 10, 2010 at 10:22pm
how do you use this with an arduino what cables? there's no sufficient documentation!
Comment by Earl on April 8, 2010 at 5:52pm
Tempurpudic mattresses are made here in ABQ. I bet they would give me some samples. I think that would make a difference.
Earl
Comment by Hari on May 31, 2010 at 1:19am
Hi friends,
I am working with graphics in VC++ (Visual studio2008). I also want to make it(9DOF) work in windows platform. The main problem is to read the COM port efficiently.
If anybody have the COM port reading code, please post it.

If i complete doing it. I will post it.
Thanks
Comment by Elkyn Fagua on December 2, 2012 at 11:05am

diydrones such boys, I am working on a project for my college on a quadrotor, but I wonder if anyone has worked with the control board with a board http://www.digilentinc.com/Products/Detail.cfm?Prod=CHIPKIT-MAX32 it is where we will implement control, with an imu https://www.sparkfun.com/products/9623 ... I'd be very happy where someone is already working on this boart, because only a little complicated ... but not impossible ... and I have progress ... but lack .. jajjajaja ... thanks ..

for if they have problems with the imu ... I've come a long way, because there are problems with the magnetometer, but have already been solved ... with the board we are programming it with Arduino, MPLAB can also ... but do not want to complicate our lives .... they are grateful boys ...

by operating the imu ... sheds very perfect positioning ...

Comment by Elkyn Fagua on December 2, 2012 at 11:19am

friends on the imu tutorial,,, here I leave,, also there is abut the code that fixes problems with the magnetometer is a laboratory ... in Berlin .. germany ..

https://dev.qu.tu-berlin.de/projects/sf-razor-9dof-ahrs/wiki/Tutorial

Comment by Elkyn Fagua on January 7, 2013 at 10:02am

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2014   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service