Speaking of servos (the topic of my prior post), the GS-1 gyro server self-stabilizes (in one axis only)...



I'm curious... has anyone used a pair of these to construct a self-stabilizing pan/tilt gimbal for their aerial shots (plane or copter)? It would certainly make for less parts and wiring, being that servos will still be required to do the job (so why not cram the gyro in the servo and kill two birds with one stone). I'd really like to research a good looking and sturdy gimbal ball turret for my particular design (Sony FCB-EX1000 block camera with 432x zoom, and FLIR PathFindIR). I've scoured the net and, short of commercial systems, was not sufficiently impressed. Ideas are welcome!

Views: 364

Tags: cam, gimbal, gyro, photo, servo


Moderator
Comment by Gary Mortimer on May 6, 2010 at 3:23pm
I like the cut of your gib, never heard of these servos. I expect somebody else has here, as it comes from the KAP world it must have been thought out.
Comment by Tom Verstappen on May 7, 2010 at 1:28am
Would like to folow this...interesting topic.
Comment by Mike on May 7, 2010 at 4:30am
Video here http://www.vimeo.com/4767293

Been around for a while and Gary is right used a lot in KAP
Comment by Riccardo Kuebler on May 7, 2010 at 10:33am
Hi,

I already posted a link to those servos a couple of week ago. Anyway they are not the best choice for a moving plane. About that please read the faq on the servo's page.
They are mainly for kites/static aerial vehicles.

Try only to imagine what could happen if you bank or even do a flat turn.

Ric
Comment by Lew Payne on May 7, 2010 at 10:35am
Yep... they were developed by a Kite Aerial Photography guy. I'm curious why there hasn't been greater adoption outside of KAP. It seems like a simple way to not only achieve image stabilization but also basic tracking while circling and such. In small drone pan/tilt turrets, space is at a premium - and you have to use servos anyway - so why not make the best use of available space.

Now, all I need is a better turret design.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service