New frame for my cargo drone and upcoming 4KG PAYLOAD test

In these days, while waiting for the waypoint navigation hardware, I'm working on the new frame for my cargo drone, and on the new box, I'm also planning for 4KG PAYLOAD test, after the first of 2kg, I've now got 580kv motors so I have better a thrust, if you want to stay informed on this project please subscribe to the newsletter: http://eepurl.com/cUJnJr  or take a look at my site: https://www.sandwichdrones.it/

and noooh that's not a vans box for the shoes, cuz I'm so professional *snob voice*

Views: 585

Comment by Nikola Rabchevsky on July 17, 2017 at 3:11pm

What method did you used to spec out the motor sizes and props?

Comment by Nicolai Valenti on July 18, 2017 at 3:21am

HI, Nikola, I've got motor sizes and prop sizes from the fabric of the motors, I also have the prop tests  

    this prop test is the for the new 580kv motors, for the older the prop test is this:

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service