Fiberglass Eagle for FPV (White and Grey available)
Designed especially for FPV (First Person View) camera flight!
This is a true FPV plane thats easy to build and comes packed with common sense FPV must-haves such as rear mounted servos for the elevator and rudder to help counter balance the additional radio gear. Other practical features include the large internal ply mounting trays for attaching large amounts of equipment in the desired position for correct C of G and of course a large canopy area, the canopy is not mounted to the frame allowing you to configure as you please.
This model is hand-launch which is easy due to combination of a large wing, and plenty of fuselage to grab a firm hold of, with the reccomended 4s power train, there will be plenty of power for the initial launch. The fibreglass fuselage is ultra tough and ideally shaped landing on grass, with a flat bottom and rear skid.
Specs:
Material: Fiberglass & Ply/Balsa
Wing Span: 1669mm (65.7")
Wing Area: 34.3" dm2
Fuselage: 1181mm (46.5")
Motor Mount Diameter: 58mm
Distance From Center of Mount to Fuse: 114mm (max prop diameter 8"]
Flying Weight: 2300g
Minimum 4 Channel, 4 x Mini servo
Price is US$ 175 (or US$ 166 if you wait about half a minute for a pop up to appear)
More information: White version or Grey version
-
Comment by steven jones on April 29, 2011 at 1:46am -
Dose any one know if the price will increase on the original FG 168.
Ive got one but before they brought it out with flaps. (because they have not updated there page yet with new photos)
-
Comment by Ahmed Rehan on January 21, 2012 at 12:53pm -
I got one but the vertical fin is not vertical some bent.
-
Comment by George Lawrence on February 10, 2013 at 9:52pm -
Hi Im Interested in purchasing one of these planes and would like to know if it can be shipped to me in South Africa
please
Comment
- ‹ Previous
- 1
- 2
- Next ›
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduRover User Group
185 members
-
Turkish Ardu Group
6 members
-
Agricultural UAVs
129 members
-
ArduCopter Italian Group
87 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
You need to be a member of DIY Drones to add comments!
Join DIY Drones