I am an ex-USAF Avionics Sensors guy, and I have always wanted a gyro stabilized laser targeting system. Now that I am all grown up, I'll settle for a gyro stabilized camera.
A little looking, and I found some nice UAV equipment.It's a little out of my price range at $10,000 for the day system and $20,000 for the FLIR system. http://store.micropilot.com/category-s/21.htm
Now I know this is mechanically and electrically easy, but for me this could become time-consuming. Can we make a cost-effective system for our UAVs?
Some examples:
http://www.youtube.com/watch?v=ewK7NkcCFCk
http://www.youtube.com/watch?v=m5fluZ7mUoY
What do you guys think?
Comment by Lew Payne on July 19, 2011 at 10:14pm @fiberwire - Very interesting factoids on the beryllium! I suppose the coded modulator was also an important part of the laser targeting system. By the way,here's a beryllium glass selling for $8.95 (USD)... quite affordable.
Comment by fibrewire on July 20, 2011 at 4:43am Yes - lasing a target was only half the problem. Using coded modulation made sure the right bomb got to the right target. IIRC, each bomb had their own unique address assigned right before launch.
Comment by Axure on July 20, 2011 at 1:36pm But that's of no interest to us.
Comment by Lew Payne on July 20, 2011 at 5:13pm @Axure - if your definition of "us" is you (i.e., Axure), then I guess that's true.
Comment by Axure on July 21, 2011 at 11:51am Indeed, I'm not interested in building a bomb targeting device. I would be content if I had a drone with a laser rangefinder.
Comment by fibrewire on July 21, 2011 at 12:16pm True, but the minds behind military weaponry aren't hell-bent on killing everything. I would impose coded-modulation for a game of quad copter lasertag!
Comment
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.1355 members
207 members
24 members
52 members
719 members
© 2013 Created by Chris Anderson.
Powered by

You need to be a member of DIY Drones to add comments!
Join DIY Drones