Ardupilot Mega Full Case v.1.2
Hi all friends .
This new Open Source case for Ardupilot Mega & GPS module & Receiver module & Telemetry module & Airspeed module .
Telemetry module = Xbee Pro 900MHz
GPS module = GS407 U-Blox5 GPS 4Hz
Receiver module = Hitec Optima 9
Airspeed Sensor = MPXV7002DP
Assembly Animation :
Download Clip 1 (1.59 MB)
Download Clip 2 (1.67 MB)
Mass properties :
Mass = 61.75 grams
Volume = 382.15 cubic centimeters
Surface area = 1940.78 centimeters^2
Center of mass: ( centimeters )
X = -1.69
Y = -1.59
Z = -7.44
Principal axes of inertia and principal moments of inertia: ( grams * square centimeters ) Taken at the center of mass.
Ix = (1.00, 0.02, 0.01) Px = 891.24
Iy = (0.01, 0.00, -1.00) Py = 2488.92
Iz = (-0.02, 1.00, 0.00) Pz = 2930.28
Moments of inertia: ( grams * square centimeters ) Taken at the center of mass and aligned with the output coordinate system.
Lxx = 891.98 Lxy = 32.27 Lxz = 19.30
Lyx = 32.27 Lyy = 2929.77 Lyz = -1.27
Lzx = 19.30 Lzy = -1.27 Lzz = 2488.69
oments of inertia: ( grams * square centimeters )Taken at the output coordinate system.
Ixx = 4469.32 Ixy = 198.80 Ixz = 796.73
Iyx = 198.80 Iyy = 6526.87 Iyz = 731.40
Izx = 796.73 Izy = 731.40 Izz = 2822.34
Created by ZXO003 & SolidWork 2010
-
Comment by Dr Mike Black on August 17, 2011 at 2:47pm -
HI Sean,
Sorry wasnt being funny about the money thing, just we can take that to PM, if it works and you want to sell them, then as its your design then you have options.
Thank you for the kind words on the cutting, I have 3 Laser cutters, for doing diff types of materials, as quickly and cleanly as possible. After 5 years of laser cutting stuff,i still love to watch them go round. its like a little bit of magic :)
Anyway, i digress, email or PM the DXF part/outputs from SW and i will cost it up accurately for you.
sort one out, and see what you think.
Hope this helps.
regards,
Mike.
-
Comment by julien Lemarié on October 26, 2011 at 10:00am -
Hi ZXO... would it be possible to get the DXF files of your case?
great job!
Comment
- ‹ Previous
- 1
- 2
- Next ›
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Documentation Editors
51 members
-
Agricultural UAVs
136 members
-
Japan ArduCopter Group
51 members
-
ArduRover User Group
185 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
You need to be a member of DIY Drones to add comments!
Join DIY Drones