Comment by Jesper Rooth on November 19, 2011 at 10:48am

Some correction on the converted baud rates for serial 3.

9600 = 9, 19200 = 19, 38400 = 38, 57600 = 57, 111100 = 111, 115200 = 115

Goes under the SERIAL3_BAUD parameter in the Mission Planner interface.

Comment by Melih Karakelle on December 6, 2011 at 12:47am

Hi Jakaria,

Sorry for my later reply.
I'm strongly suggesting "Arduino Uno" platform for your project. It's including USB serial for your PC connection (and firmware loading)   and have a lot of "serial to servo" firmware sample on the web. Just write your own ground station software and  send the servo commands to arduino over USB serial. Arduino forums helps you for details.

Comment by Jakaria on December 16, 2011 at 11:38pm

Melih,

 

Thanks for your valuable advice. As per your instruction I've already started the project. I've bought 2 Arduino uno. Already studied the Arduino forum for "serial to servo" firmware sample, it seems easy to implement for my project.

 

But I'm facing difficulties in writing a ground station software. Because I've very less idea about programming. Pl suggest me how can I do this. If possible pl send me some links. Thanks in advance.

Comment

• ‹ Previous
• 1
• 2
• Next ›
• Page