Moderator Comment by Hooks on June 17, 2012 at 4:18am

Could you please show some pictures?

Comment by james sowell on June 17, 2012 at 4:58am

yea mine was beat up perty good to back 2 inches of the wing tip was broke but a lot of dings  was wanting to cover it with that carbon vinyl any ways 

Comment by Hans Miller on June 17, 2012 at 2:42pm

I'll post up some pictures when I get home from work.

Comment by Delfin Magote III on July 14, 2012 at 10:31pm

Hey guys, can you help me with my X8 Drone setup? Please see my post here. Thanks! 

Comment by Troy Fardell on July 19, 2012 at 3:41am

here is mine so far. I think it will be the heaviest one flying. Chute landing ortho mapper

X8 Build log

Comment by Troy Fardell on July 19, 2012 at 3:42am

...click "continue reading" on the top post to see the pics.

Comment by Delfin Magote III on July 20, 2012 at 1:30am

I have already finished my list and gonna wait for all of it to arrive, then I'm gonna start the testing stage.Hoping to get this bird to fly. :)

Gonna try your chute release too, but figuring out how, I guess I'll just stop by your RCG post. :)

Comment by Simon Howroyd on August 3, 2012 at 11:50am

Awesome plane...

Do you think it would take 3kg payload.  I don't need high performance, just the ability to carry 3kg.

I shall probably have to manufacture an undercarriage and have a long ground roll, but will it do it? Anyone who owns an X8 your opinion would be greatly received! Thanks

Comment by Glen Thomas on August 23, 2012 at 11:52pm

X8 carries 3kg easily, airframe empty comes in under 1.5kg if you build conservatively and my present all up weight with 2, 4s lipos, large motor putting out 3.3kg thrust, gyro, receiver, telemetry module with altitude module, camera anti vibration mount with canon S100 and fpv camera with TX-RX is just over 2.7kg and the X8 flies out of my hand

Comment by Simon Howroyd on August 24, 2012 at 12:56am

Cheers Glen, that looks awesome

Comment

• ‹ Previous
• 1
• …
• 14
• 15
• 16
• 17
• 18
• Next ›
• Page